Wii U™ Controller Charge Station
QUICK SETUP GUIDE
RF-GWU1303
Package contents
• Wii U™ controller charge station
• Wii remote rechargeable
• Mini USB charge cable
batteries (2)
• AC
adapter
•
Quick Setup Guide
Cautions
• You must use the included AC adapter to power the charge station.
• Do not disassemble any of the components. Refer all services to
qualified personnel only.
• Do not place or store the product in a humid area and do not expose
it to water or rain.
• Use the product only as instructed. Read all instructions before
operating the product.
• Failure to follow these directions may void the warranty.
• For use with Wii U™ controllers and peripherals.
Features
• Designed to charge all Wii U™ controllers, including the Wii U
GamePad™, Pro Controller, and Wii™ Remotes.
• LED Indicators provide charging status notification. Red indicates
charging in process, green indicates charging complete.
Before using your new product, please read these instructions to prevent any damage.
Original
battery cover
SYNC
Battery
pack
Installing the batteries into the Wii Remotes™:
1
Remove all silicone skins or jackets on the Wii remotes in order to
access the battery compartment, then remove any batteries in the
compartment.
2
Insert the battery pack into the battery compartment with the front
end first, then snap the battery pack into the battery compartment.
Red: Charging in process
Green: Charging complete
Setting up the Wii U Controller Charge Station:
1
Connect the supplied AC adapter into an appropriate electrical outlet.
2
Insert the AC adapter DC plug into the DC IN 5V jack on the back of the
Wii U Controller Charge Station (see below):
3
Place the Wii U Controller Charge Station on a flat and stable surface
and start charging the controllers.
Using the Wii U Controller Charge Station
Wii Remotes™:
1
Remove all jackets, silicone skins, and the Motion Plus adapters from
the remotes. The remotes will not charge with these on. Align the Wii
Remote hand strap with the groove in the charge station to prevent
the hand strap from interfering with charging.
2
When inserting the Wii Remote into the charge station, the charge
status indicator glows red while the battery pack is recharging. When
recharging is complete, the charge status indicator glows green.
