RM169
Professional Bluetooth Mixer
SPECIFICATIONS
Input Impedance:
Mic:
600 Ohms XLR balanced
Source: 22K Ohms RCA
Mic Insert:
22K Ohms 1/4” TRS insert
Max Input Level:
Mic:
-14 dBV Mic level
Source:
24 dBV
Headphone Output Impedance:
>8 Ohms
Total - In/Out Connectors:
5: XLR, 5: Stereo RCA, 1: 1/4” TRS, 2: 3.5mm
Phantom Power:
+15 VDC
Output Level:
+17 dBV max
Output Impedance:
100 Ohms Balanced
Max Gain:
Mic:
60 dB
Source:
26 dB
Tone Controls:
+/-12 dB 100 Hz Bass
+/-12 dB 11kHz Treble
Noise Floor:
- 80 dB, THD: <.025%,
S/N Ratio:
96 dB
Size:
19” x 1.75” x 4” (48.3 x 4.5 x 10 cm)
Weight:
5 lbs. (2.3 kg)
USING THE MIC EFFECTS INSERT
In order to add effects to the microphone signal, an insert cable is needed. The Tip of the
plug acts as the Send, the Ring is the Return.
Connect the insert cable’s TRS end to the Mic FX Insert jack on the rear of the RM169.
Connect the Tip connection to your effects processor’s Input jack, and the Ring connec-
tion to the Output of the effects processor. The RM169 effects insert is mono, so if the
effects processor is stereo - choose a Mono output. You may need to refer to your effects
processor owners manual for more information about operating it in mono.
Make sure a microphone is properly connected to the RM169 and the unit is on. Speak
into the microphone and adjust the levels of your effects processor for the desired pro-
cess and level of effect.
Rolls Corporation
Salt Lake City, UT
9/19
www.rolls.com
QUICK START OPERATION GUIDE
IN
4 MONO
HEADPHONE
LEVEL OUTPUT
MADE IN USA
www.rolls.com
MODEL RM169
MADE IN USA
+
ROLLS
15 VDC
RM169
MAIN OUTPUTS
-
OFF=UP
ON=DOWN
PHANTOM POWER
MADE IN USA
www.rolls.com
RESET
BLUETOOTH
POWER
Professional Bluetooth Audio mixer
ROLLSBT
BLUETOOTH ID
- Fast blinking blue unpaired
- Steady blue paired no audio signal
- Slow blinking blue paired with audio
IN
4 MONO
HEADPHONE
LEVEL OUTPUT
MADE IN USA
www.rolls.com
MODEL RM169
MADE IN USA
+
ROLLS
15 VDC
RM169
MAIN OUTPUTS
-
OFF=UP
ON=DOWN
PHANTOM POWER
MADE IN USA
www.rolls.com
RESET
BLUETOOTH
POWER
Professional Bluetooth Audio mixer
ROLLSBT
BLUETOOTH ID
- Fast blinking blue unpaired
- Steady blue paired no audio signal
- Slow blinking blue paired with audio
