– 1005
– 1006
– 1009
– 1015
– 1016
– 1019
RONDA slimtech
09 / 2017
Cal. 585 / 785:
Battery type: 362 / SR721SW
Cal. 774 / 775 / 784:
Battery type: 364 / SR621SW
Cal. 505 / 515 / 704 / 705 / 714 / 715:
Battery type: 371 / SR920SW
Cal. 6003.D / 6004.D / 6003.B / 6004.B:
Battery type: 373 / SR916SW
Cal. 1005 / 1006 / 1009 / 1015 / 1016 / 1019:
Battery type: 341 / SR714SW
Cal. 7002.B / 7003.B / 7004.B:
Battery type: 381 / SR1120SW
Cal. 715Li:
Battery type: CR 2016
Precision: +20 / -10 seconds per month
User’s Manual English
Movements Caliber
– 774
– 775
– 704
– 705
– 784
– 785
– 714
– 715
– 715Li
– 6003.D
– 6004.D
– 6003.B
– 6004.B
RONDA normtech
– 585
– 505
– 515
RONDA powertech
– 7002.B
– 7003.B
– 7004.B
RONDA mastertech
Cal. 705
Cal. 784
Cal. 785
Cal. 714
Cal. 715
Cal. 515
Cal. 704
Cal. 7004.B
Cal. 505
Cal. 775
Cal. 7003.B
Cal. 585
Cal. 774
Cal. 7002.B
Cal. 6004.B
Cal. 1009
Cal. 1015
Cal. 1016
Cal. 1019
Cal. 6003.B
Cal. 1006
Cal. 6004.D
Cal. 1005
Cal. 6003.D
Cal. 715Li
Pos. I Position of rest (watch running)
Pos. II Quick-change correction for date
The date can also be corrected during the day-changing
phase between 10 pm and midnight. The date of the follo-
wing day has to be set, because no automatic date change
takes place at midnight.
– Pull the crown out to position II (watch still running).
– Turn the crown clockwise until the required
date appears.
Cal. 6003.D & 6004.D:
– Turn the crown until the required date appears.
– Push the crown back into position I.
Pos. III Setting the time
– Pull the crown out to position III (watch stopped).
– Turn the crown, until the current time is displayed
(remember the 24-hour cycle).
– Push the crown back into position I.
Pos. I
Position of rest (watch running)
Pos. II Quick-change correction for date
The date can also be changed during the day-changing
phase between approx. 8.00 pm and midnight.
The date of the following day has to be set, because no
automatic date change takes place at midnight.
– Pull the crown out to position II (watch still running).
– Turn the crown until the current date appears.
– Push the crown back into position I.
Pos. III Setting the time
– Pull the crown out to position III (watch stopped).
– Turn the crown, until the current time is displayed
(remember the 24-hour cycle).
– Push the crown back into position I.
Pos. I
Position of rest (watch running)
Pos. II Quick-change correction for date
Blocking time for the quick-change day correction
is from approx. 9.30 pm and midnight.
– Pull the crown out to position II (watch still running).
– Turn the crown until the current date appears.
– Push the crown back into position I.
Pos. III Setting the time
– Pull the crown out to position III (watch stopped).
– Turn the crown, until the current time is displayed
(remember the 24-hour cycle).
– Push the crown back into position I.
You have decided to buy a watch, which was assembled
by a watchmaker using a Ronda movement. Please note
that no watches are produced or distributed under the
Ronda brand.
In case of repairs, guarantee claims and questions
concerning the functioning of a watch, purchasers and
consumers should contact their retailer or the watch
manufacturer, for which the relevant information can
be found in the sales or guarantee documentation pro-
vided with the watch.
I II III
I II III
I II III
BA_500_700_1000_6000_7000_Basic_en_de_fr.indd 1-2
BA_500_700_1000_6000_7000_Basic_en_de_fr.indd 1-2
21.04.20 09:16
21.04.20 09:16
