background image

INSTRUCTION MANUAL 

 

Air-powered Brad Nailer 
F50M 
 
 
 
 
 
 

 
 
 
 

            Residual Risks 
Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may 
arise in connection with the tool’s construction and design: 
1.

 

Damage to lungs if an effective dust mask is not worn.   

2. Damage to hearing if effective hearing protection is not worn.   
3. Wear eye protection.   
4. Health defects resulting from vibration emission if the power   
tool is being used over longer period of time or not adequately managed and properly maintained. 
 
 
 
 
 
 
 

 
TECHNICAL SPECIFICATIONS 

MAGAZINE CAPACITY 

100 nails 

NAILS 

18-gauge brad nails (5/8

–2") 

OPERATING PRESSURE 

70

–110 PSI (4.8–7.5 bar) 

AIR INLET 

1/4" 

MAXIMUM PRESSURE 

120 PSI (8.3 bar) 

WEIGHT 

3 lb 6 oz (1.55 kg) 

CF: Cubic Feet (the volumetric flow rate of air corrected to standardized conditions of temperature and pressure). 

SAFETY GUIDELINES 

This manual contains information that relates to PROTECTING PERSONAL SAFETY and PREVENTING EQUIPMENT PROBLEMS. 
It is very important to read this manual carefully and understand it thoroughly before using the product. The symbols listed 
below are used to indicate this information. 
                    DANGER!    Potential hazard that will result in serious injury or loss of life. 

WARNING!    Potential hazard that could result in serious injury or loss of life. 
CAUTION!    Potential hazard that may result in injury or damage to equipment. 

PERSONAL SAFETY 

These precautions are intended for the personal safety of the user and others working with the user. Please take time to read 
and understand them. Make sure you read and understand this manual before using this tool. Make sure other users read 
and understand this manual before they use the tool. 

IMPORTANT: 

Please read this manual carefully before using this product, and save it for reference. 

This manual contains important safety and operating instructions. Read all instructions and follow them 
with use of this product. 

TABLE OF CONTENTS: 

-TECHNICAL SPECIFICATIONS                                                                -SAFETY GUIDELINES 
-KEY PARTS DIAGRAM                                                                            -TECHNICAL INFORMATION 
-TYPES OF NAILS                                                                                    -OPERATING INSTRUCTIONS 
-MAINTENANCE                                                                                    -TROUBLESHOOTING 
-EXPLODED VIEW                                                                                  - PARTS LIST 
NOTE: If any parts are missing or damaged, or if you have any questions, please contact with rongpeng@rongpeng.com 

Summary of Contents for F50M









Reviews: