To install
1. Assemble sign with clips and top and bottom
holders.
2. Attach regular hooks (2) to each clip in the top
holder of the sign. Hook them over the side hooks
on the Omni Head (see illustration).
3. Raise the RoPole to the ceiling. Loop the
regular hooks through the previously installed
eye-hooks on the ceiling, one side at a time.
To remove
Simply reverse the steps above.
Hook
Sign
Holder
The OneUp and the RoPole are patented and registered trademarks of Rose Displays, Ltd.
Neither the manufacturer nor any sales agent may be held liable for injury, loss or damage
resulting from the use of these products.
Part #99 INSOmniRopole
Inception 7/99
Omni RoPole
®
Instructions
RoPole
Omni
head
Omni RoPole Sign
Hanging Instructions
SIDE HOOKS
Please Note
Sign assembly pictured above does not exactly match
signware kit provided. It is important that the metal
sign hanging hook be looped over the Omni head
side hooks for proper installation.
Clip
35 Congress Street, Salem MA 01970
Tel# 1-800-631-9707 Fax# 1-800-560-2890
e-mail:signware@rosedisplays.com
