FO-OPLK_2018-06
FO-OPLK
Opel+ Keystone Louver (Top)
The Top Louver for the Opel+ Keystone is a required option when the top
louver is not blocked on the fireplace.
INSTALLATION
1. Start by removing the small keystone installed on the fireplace. To remove the small keystone, open
the door and loosen the nut behind the facing with a
7
/
16
” wrench, then lift and remove the small
keystone. Remove the nut from the back of the keystone. You will need it for the new larger keystone.
2. Install the bolt support at the top of the louver opening. Center it horizontally in the opening, push up
on the inner casing and pull it forward as far as it will go. Install a threaded "U" connector over each
hole on the bolt support bracket.
Rear View
