background image

Page 1 of  5

Knob

560-

80201-

00

023-80147-00

FSC to ACME

Adapter

Blue - Low Side

Field Service Coupler

023-80096-00

Field Service Coupler

023-80095-00

Red - High Side

Yellow Hose (30 inch)

Blue Hose (11 feet)

028-80036-02

028-80035-02

Red Hose (11 feet)

360-80464-03

Valve

Anti-blowback

Oil Drain Bottle

026-80207-00

Oil Charge Bottle

026-80208-00

Unpacking - RHS780

Thank you for opening the envelope and reading this documentation. Your new
RHS780 was carefully assembled and will begin generating profits for you in just a
few minutes.

1. Please follow these simple instructions to ensure your new machine survived

any rough handling it may have experienced during transport.

2. Immediately report any visible damage to the unit. Save the shipping carton for

inspection by a claims adjuster. Call RTI Technologies at 800-468-2321 (ext
259) for instructions.

3. Cut and remove all hold-down straps including the one underneath the front of

the unit.

4. Remove protective plastic cover.

5. Carefully tip unit and remove cardboard blocks from

underneath.

6. GENTLY ease the unit off the pallet.

7. Unscrew knob from top and store on rear of unit. This

knob restrains the internal cylinder during shipping and
should be used during any future shipping. A hole plug is
provided to insert in the hole on the top.

8. Refer to the illustration below and verify that all accessories were received.

Summary of Contents for RHS780






Reviews: