R5 SUPREME NAV System
Operator Short Instruction
7000 118-369 A1
This quick user guide serves as a complement to the
standard manual with P/N: 7000 118-301 found on the
documentation CD. This guide is designed to give
immediate access to essential information when operating
the system on a daily basis.
Please visit our web-site for the latest news regarding this
and other ship borne products. Our web-site also contains
contact information to our dealers and service stations
world-wide and much more.
www.saabgroup.com/transpondertech
Saab TransponderTech AB
R
5
S
U
P
R
E
M
E
N
A
V
SYSTEM MODES
Important:
The R5 SUPREME Navigation System is
offered in GPS and DGPS configuration. In addition, the
R5 CDU can be installed using different system modes.
Mainly:
Navigation System
– Standalone or in network
Combined AIS & Navigation System
This short instruction covers Navigation System
functions only.
GENERAL OPERATION
SYSTEM NAVIGATION
The R5 CDU is equipped with a resistive touch screen to be used for
system navigation. The system can also be navigated using the keypad.
Use the
Arrow keys
to navigate the system views. Press
ENTER
to
open a view. Press ESC to go back.
CHANGING PARAMETERS
Many views contain parameters that can be edited. To edit a parameter,
press the parameter value or select it by using the
ARROW KEYPAD
and press
ENTER
.
Press
BACKSPACE
button to delete
characters. Press
ENTER
to accept input after editing a parameter.
Press ESC
to undo changes. Press the
Save
button to save and exit a
view.
Data can be entered to the system in the following ways:
1.
Numbers:
A virtual numerical keypad will be shown for
numerical parameters.
2.
Text:
A virtual keyboard will be shown for textual parameters.
3.
Selection List:
Parameters with fixed values are displayed in a
drop-down list, shown when the parameter value is pressed.
Select one of the listed values.
4.
Selection List and numeric input:
In some views it is possible to select items in a list of predefined
values. It may also possible to enter a custom number. To do
this, select the
Numerical Input
choice and input a numerical
value using the virtual numerical keypad shown.
DO NOT TURN OFF THE SYSTEM WITHIN 2 SECONDS OF A
PARAMETER CHANGE!
