background image

 

 

  DESCRIPTION:

     Saddlemen Seats for FXR           

     

PART NUMBER:    

 882-09-all

 

 

  FITMENT:

 

 H-D® FXR® models 1988-2000

 

  Qty        Item 

 

  Qty   

Item

   

    

  1          Saddlemen seat 

    4 

Bolts, 5/16" x 18

   

     

  1          Instructions      

    4 

Washers, 5/16"

Please read these instructions completely before starting installation.  All “NOTE” 

“CAUTION” and “WARNING” notations are serious safety issues and should be read 

carefully.  Possible injury to riders or damage to the motorcycle and/or accessory 

may result if improperly installed. 

These instructions contain important information for future reference and should be given to the customer.

Because of the variety of motorcycle configurations, other accessories, and the features and intended use of this Saddlemen seat, there 

may be different mounting options. You are responsible for the proper installation of this seat on your motorcycle. Your attention to these 

installation instructions, any additional specific instructions and recommendations will permit the safe and proper use of this seat. You must 

mount this seat properly and securely before riding your motorcycle. If you lack the ability to safely and properly install this seat, seek out a 

qualified motorcycle technician for assistance. During installation, you may need to support the motorcycle with a suitable stand or lift so it 

will not tip over and injure you, or damage the vehicle. Using or mounting this seat improperly could result in a loss of control of the motor-

cycle which could result in damage to your motorcycle or other personal property, the property of third parties, and/or personal injury to 

yourself or others, up to and including death. 

PASSENGER GRAB STRAP: This accessory seat is provided without a passenger grab strap. Carrying a passenger without a grab strap in place on your motorcycle may be 

hazardous for the passenger. Grab straps, rear mounted foot pegs, sissy bars, passenger backrests and trunks aid in making 

a passenger more secure on the vehicle. Laws in some jurisdictions require grab straps or other security devices when a pas-

senger is transported. Do not transport a passenger if they are not secure. Do not disable grab straps or other safety features 

provided on your motorcycle and obey all traffic laws while riding. 
Saddlemen offers a complimentary grab strap for this seat, part no. 15327. Call (310) 638-1222 for more information. 

Always ride responsibly and take precautions to be sure your passenger is secure and comfortable at all times. 

California Proposition 65 Warning

WARNING: This product contains chemicals known to the State of California to cause cancer and 

birth defects or other reproductive harm. For more information: www.P65/Warnings.ca.gov

BE SURE TO THOROUGHLY READ AND CLOSELY FOLLOW THE MOUNTING INSTRUCTIONS THAT ARE INCLUDED WITH THIS SEAT. 
• The seat must be installed and securely fastened onto the chassis of the motorcycle. Refer to your motorcycle’s Owner’s Manual and/or Service Manual for guidance.  
• If you do not understand these instructions DO NOT mount the seat, and remove any related components you may have already installed on your motorcycle. 
• Thoroughly inspect your motorcycle’s seat before every ride. Do not use this seat if its mounting system has been modified, has deteriorated, loosened or is beginning to fail. 
• Continually check the security of your seat and other accessories at each stop as you ride. Items attached to your motorcycle can loosen during operation, so be sure to 

check them frequently.
• Do not use this seat if you have any doubts as to whether it is properly mounted to your motorcycle. You must be sure that the installation of the seat will not damage your 

motorcycle’s painted or plated parts. Saddlemen is not responsible if you or your technician mount the seat and it damages your motorcycle for any reason. 
• When using any accessory, do not exceed your vehicle's Maximum Gross Vehicle Weight as listed on your motorcycle or in the manufacturer's owner's manual.

IS-11-400447 Rev 0 (10-2022)

Summary of Contents for 882-09

Page 1: ...id in making a passenger more secure on the vehicle Laws in some jurisdictions require grab straps or other security devices when a pas senger is transported Do not transport a passenger if they are not secure Do not disable grab straps or other safety features provided on your motorcycle and obey all traffic laws while riding Saddlemen offers a complimentary grab strap for this seat part no 15327...

Page 2: ...olts for the hinge and two bolts for the latch mechanism from the bottom of the seat Replace it with your new Saddlemen seat using the new bolts and washers provided Tighten the four bolts approximately 10 lb ft FXR seat installation method Without a Hinge To install a seat on an FXR without using the hinge you ll need to obtain an FXR Front Mounting Bracket Saddlemen part number 14302 see Fig C A...

Page 3: ...touching painted or finished surfaces on your motorcycle If the test fitting of your seat indicates an area where the seat is touching a sensitive surface you can protect that area by using the film from the Saddlemen Protective Tape Kit PN 4320 0807 This kit can help protect these areas from abrasion damage from a seat Some seat designs vary from the original seat so the Protective Tape kit is su...

Page 4: ...bor are covered Return ground tranportation charges to Consumer for repaired product are covered REPAIR OR REPLACEMENT AS PROVIDED IN THE WARRANTY IS YOUR EXCLUSIVE REMEDY What is Not Covered Saddlemen does not warrant any product which is damaged from abuse lack of maintenance or is not used for its intended purpose Normal wear and tear are excluded This Limited Warranty does not cover or apply t...

Reviews: