background image

                                                                       

 

 

 

 

 

Ver. 7.0 

   

You could enter into the programing mode to re-set the function code. To use and program the hotel 

safe, please kindly read and follow the instructions carefully: 

 

 

Important Tips

The digital in every position indicate the different function.If you wouldn’t like to change the current

setup,you only need to input the same digital in corresponding position or press

 

 

“#”

 

 

to enter

into the next screen till quit . 

 

Once you changed their setup ,please press the key

 

“#”

 

to save the latest setup when quit the

programming mode. 

 

 

 

 

 

 

 

 

 

 

 

Door position:

 

OPEN (initial code is 

 

1234

  

;

 initial master code is

 

000000

   

 

key in 

**

,the hotel safe LED  will show 

PROG 

”, 

then input the programming code 

751019

in 5 

seconds after  “

PROG

” disappeared. Now the operation screen starts to enter into programming mode

 

(input key “#” again,you will enter into the second screen) 

   

 

 

 

 

Program Mode

First Screen 

 

The Options

 

(1) CODE APPEARANCE ON THE SCREEN   

 

Press 0

 

– The presonal code number will not appear on the screen each time when you input the code 

(namely is the screen just shows “

--------

” instead of digit code when you input the code to 

open or 

close 

the door )   

 

Default Parameter 

Press 1

 -The personal code number will appeared each time. 

 

     

 

 

 

 

SAGA 

Summary of Contents for DCP Series








Reviews: