background image

1

DVD-ROM DRIVE
SD-610/612

http://www.samsungelectronics.com

User's Guide

BG68-00163A Rev:01

Safety Precautions

The following diagrams illustrate the precautions to be taken when using
your DVD-ROM drive. 

You must not use the drive in any manner other than that specified in this guide.

Avoid exposing your eyes or skin to direct or scattered radiation.

CAUTION

Do not attempt to repair the DVD-ROM drive yourself. Contact
your dealer or local SAMSUNG representative for all repairs.
If you make any adjustments or perform any operations other
than those specified in this guide, you run the risk of exposure to
hazardous radiation.

WARRANTY Please refer to the Samsung limited warranty statements.

Precautions

1. To reduce the risk of fire or electric shock, do not expose

this appliance to rain or moisture.

2. Always check each disc for cracks before using it. If there are

cracks on the surfaces, especially around the border of the cen-
ter hole, we recommend that you make a copy of the disc
immediately and then stop using it. If you continue using the
disc, it will probably develop more cracks and eventually cause
irreparable damage.

3. Do not use poor quality discs:

From unknown sources

● 

Without any copyright

Scratched or damaged in any way

Summary of Contents for DVD-ROM drive






Reviews: