BN68-05034A-00
QUICK START
GUIDE
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control
Stand Parts and Cables
Smart Touch Control
Cable manager
Stand Mount
Batteries (AAA x 2)
IR extender
Power cord
Also included: User manual, regulatory guide, 3D Active Glasses,
ferrite core
Step
1
Attach the TV to
the Stand
Step
2
Connect video
devices
Step
3
Insert the
batteries into the
remote control
Step
4
Power on and
start the initial
setup
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1
Attach the TV to the Stand
1
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
4
Insert 4 screws and secure the stand to the
mount.
x4 (M4 X L12) 51”
x4 (M4 X L10) 60”, 64”
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
5
1
2
3
Holding the stand parallel to the screen, slide
the stand into the notches on the back of the
TV.
2
Base
Screws
x 8
Put a base and screws off to assemble the stand
out of the box.
3
Fit the stand and mount together, making sure
the notch on the mount aligns with the stand.
6
Insert 4 screws and secure the stand to the TV.
x4 (M4 X L12)
[PF5500_QSG]BN68-05034A-00ENG.indb 2
2013-02-18 �� 10:49:31
