background image

Built-in

Wireless Module

(Optional)

Battery Cover

Battery Holder

Deadbolt
OPEN Button
Manual knob
Open-door sensor

1.5V AA Batteries

Registration Button

6

5

4

3

SHP-DS705

2

The product components used may vary depending on the installation 
environment.

Key Tag (For B2C Only) (2EA)
User Manual
Product Warranty

‘AA’ Batteries (LR6) (4EA)
Installation Paper
Installation Screws
Spacer 

Silent Mode

All registration and settings operate only when the door opens. 
 

Before entering the password, press the [    ] button and enter the password, then both 

the sound of the key entering and the door opening will be suspended. It is a useful 

function if you do not want to disturb neighbors when you go in and out at night.

When the door is locked, press 
the [OPEN] button on the Inner 
Body to open the door.

When the door is locked, press 
the [OPEN] button on the Inner 
Body to open the door.

Open the battery cover of the 
inner body and briefly press 
the [Register] button.

When the number pad is lighted, 
enter the password and then 
press the [    ] button.

The door is automatically locked 1 seconds after the door is closed.

When the door is locked, turn the 
[Manual knob] in the direction of 
[     ] to open the door.

When the door is locked, turn the 
[Manual knob] in the direction of 
[     ] to lock the door.

Place the card or key tag 
on the card reader.
The door will be opened 
after 1 second.

 

Outer Body Part

Inner Body Parts

Card and Key Tag Registration

Opening the Door from the Inside

Closing the Door from the Inside

Product Components

USER MANUAL

Placing the Card or Key Tag on the Card Reader

When the welcome function is deactivated, touch the number pad and 
place the card to open the door.

Note

Download 

sHome Doorlock

 

from App Store / Google Play Store.

For the more information about registering, please refer the 
description of application use.

Up to 

eight

 compatible smart phones can be paired. 

To pair multiple smart phones, turn off the Bluetooth of a paired  

smart phone, and pair another smart phone. 

If a registered Bluetooth enabled smart phone is lost or repaired, 

your registration information cannot be deleted from the door lock. 

It is recommend that the door lock should be initialized. (Refer page 7)

Please check support smart phone model on the web page.

               

When a new card or key tag is registered, those already registered are not deleted 

but additionally registered. If you do not want to register the existing card, delete 

all cards and register a new card. Up to 20 cards, including the key tag, can be 

registered.(Only ISO14443 A Type is available.)

Opening the Door from Outside with a Card or Key Tag

The door can be opened from outside using a card or key tag.

Place the registered card or key tag on the card reader.

Automatic Locking Setting

1. Pressing the [Register] Button

Place the card or key tag  
to be registered on the 
card reader of the outer body.

To terminate registration, 
press the [Registration] button.

3. Placing the Card or Key Tag 
    on the Card Reader

2. Entering the Password

4. Registration Done

Manual Locking Setting

 

 

 

Entry Complete /

Silent Mode Switch Button

Proximity Sensor

Number Pad
Battery Replacement 

Time Alert
Away Security Setup

Card Reader

Reset Switch
External Power 

Contact Port

6

5

PTSP2240ONTA ED:01

www.samsungsds-nss.com/en

 

 

Outer Body

Inner Body

Strike

Fastening 

Panel 

Installation Jig 

(Bracket)

Pairing with your Smart phone

OR

OR

 

To register multiple cards or key tags, lightly place another card or key 

tag on the card reader within 20 seconds after registering the previous 

card or key tag. 

To make sure the card and key tag has been properly registered, 

and close the door.

Please, be aware that the only provided card and key tag by Samsung 

SDS Co. Ltd. shall work properly on the regular use for this door lock.

 

Pairing with your 

Smart phone 

Conveniently open the door through the
Bluetooth function of a smart phone.

Welcome Mode

When a user gets close to the door lock,
The authorization standby mode will
Automatically activate.

Silent Mode

When going in or out, the sound of
the key entering and door opening
will be suspended.

Double Security

Security check with the card and the password 
can be optionally applied.

At-home Security 

When someone is inside the house,
authorization for entry from the outside
will be prohibited.

High temperature Detection 

Generates alarm in case of a fire

Using the Emergency Battery 

Using the Emergency Battery

DING DONG DENG DONG

DING DONG DENG DONG

DING DONG

Success:

DING DONG DENG

 

→ 

DING DING

Fail:

DING DONG DING DONG

DING DONG DENG

 

DING DONG DENG

 

 

Success:

DING DONG DENG DONG

Fail:

DING DONG DING DONG

When approached the door lock (When applying the "welcome function") 
or if the number pad is touched, a lighting will appear on the number pad.

When approached the door lock (When applying the "welcome function") 
or if the number pad is touched, a lighting will appear on the number pad.

Touching [Number  
Pad]will light up the  
number pad.

Opening the Door from Outside with a Password

2. Common Mode

 

Password must be entered after the light is on, and if does not, touch 
[Number Pad] and re-enter.
To cancel, press [    ] button and re-enter.
If the password is wrong 5 times, “peep” warning alarm will sound 20 
times and the system will shut-down for about 3 minutes. When 
malfunction happens, “beep” will sound every 10 seconds, and stop   
mode will be turned off automatically after 3 minutes with multiple ‘beeps’.

 

 

 

 

 

Note

When purchased, the product is set to Randomizer mode initially.

1. Randomizer Mode

When two Random buttons are 
lighted, press the buttons in order.

When the numbers on the number 
pad are lighted, enter the password 
and press the [    ] button.

 

 

Success:

DING DONG DENG DONG

Fail:

DING DONG DING DONG

Enter the password when the number pad 
is lighted, and press the [    ] button.

 

Success:

DING DONG DENG DONG

Fail:

DING DONG DING DONG

Note

Warning

(     page)

3

(     page)

4

(     page)

5

(     page)

6

(     page)

7

(     page)

8

(     page)

9

Setting guide (     ,      page)

10 11

 

Note

 

 

Warning

The password can be 4~12 digits number. Only one password can be registered.
The initial password is set to ‘1234’. 

Password Register/ Change

1. Pressing the [Register] Button

3. Entering a New Password

2. Entering the Current Password

DING DONG

Open the battery cover of 
the inner body and briefly 
press the [Register] button.

Enter the new password (4 to 12 digits) 
and then press the [    ] button.

When the number pad is lighted, enter the 
current password(‘1234’ after initialization) 
and then press the [    ] button.

Success:

DING DONG DENG

 

→ 

DING DING

Fail:

DING DONG DING DONG

DING DONG DENG

 

To prevent an intrusion, it is recommended to make a password with 

6 or more digits (from 0 to 9 can be set).

A registered password cannot be deleted. Register a new password.

Manage your password with care so that unauthorized people will not 

have access to it. Regularly changing your password can reduce the 

risk of it being leaked.

Warning

The factory defaults are set with the welcome mode on and the 

one-minute alarm function off.

The working distance of the infrared sensor can differ depending on 

light conditions and other environments. When the front door is exposed 

to sun light or constant bright lights it is advised to limit the usage of the 

sensor as it might sound the alarm.

Welcome mode on: 

The mode will automatically activate the authorization standby 

mode when a user approaches the door lock.

Welcome mode off: 

The mode will activate the authorization standby mode when 

user touches the number pad.

One-minute alarm function on / off: 

When someone remains in front of the door lock 

for more than a minute, this mode will sound the tamper prevention alarm.

The Welcome mode is a convenient function that automatically activates the 

authorization standby mode when a user approaches the door, even before 

touching the number pad.

Welcome Mode

Double Security mode requires both card and password to open the door, 

ensuring more security. To setup the Double Security mode, more than 

1 card must be registered.

Double Security

 

 

 

 

Warning

Success:

DING DONG DENG

 

Fail:

DING DONG DING DONG

Touching 
[Number Pad].

Enter the password when 
the number pad is lighted, 
and press the [    ] button.

Place the card on to the [Card 
Reader]. If the authentication is 
successful, the door will open.

Take your card when going out after the Double Security mode is set.

You cannot open the door if there is no card.

Fail:

Success:

DING DONG DENG DONG

DING DONG DING DONG

Reviews: