smarthome.samsungsds.com
※
Color may be added and specifics will be determined by
future policy.
Table of Contents
SHP-R80
User Manual
GC68-02494A, ED01
1
2
3
4
5
6
7
8
9
Components
Names and functions
Open door from outside
Open / Close door from inside
Register authentication method
(password / fingerprint / keytag)
and install app
Additional functions and
setting method
How to use security function
Initialization
How to replace the battery and
open the door during an emergency
※
The company reserves the right to change the contents of the user manual without
notice in advance to upgrade product functionality.
Safety Caution
The list of safety caution protects the safety of users
and prevents property damage from accidents and
usage inconvenience. Please read and comply with the
following safety caution.
• Do not install or repair this product without permission.
• The gap between the door and door frame should not exceed 5 mm during installation.
• Fracture in the door lock touchpad may result in an environment where the door lock is exposed to
direct sunlight for a long period of time. Avoid the environment from being exposed to direct sunlight
when installing the door lock.
• Do not apply excessive force or press the door lock button with sharp tools.
• Do not operate this product with wet hands, and do not let liquids, such as water and beverage,
infiltrate the product.
• Wipe the lock with soft and dry cloth, and do not wipe this product with water, benzene, alcohol, etc.
• Check whether the door is completely locked when leaving home.
• Manage the password carefully and regularly change the password to prevent password leak.
• Insert the batteries accurately according to the terminal (+/-) of the battery.
• Be mindful that battery leak or rupture may result from inserting the batteries at opposite terminals (+/-).
• Battery consumption may vary depending on the wireless communication environment.
Battery use time may decrease if the communication environment is unfavorable.
• Wireless radio waves or another device may cause interference when using this product.
• Wireless radio wave interference may take place during operation of the wireless device of this product,
and this results in suspension of human safety-related services.
• Product performance may suffer if used in an environment with high humidity.
• Maintain at least 20 cm of distance from the product when using the product.
※ A fee may be incurred for defects caused by the customer during installation.
It is recommended to install the product through an installation engineer.
※ User Manual may be changed to improve product performance without prior notice to users.
※ Images in this User Manual may change and the color of the product may differ from the actual
product.
NOTE: More than one mechanical
override must be stored in other places or
carried by the user.
NOTE: This door lock does not require a
key. A product failure may result in partial
functional damage.
The user must be well acquainted with the
use of the manual door lock in case of
unforeseen circumstances.
Mortise
Strike Box
Item
Specifications
Rated voltage
4, AA 1.5V alkaline batteries (LR6) (DC 6 V)
Emergency Power
1, 9V battery (6LF22) (to be purchased separately)
Entry method
Fingerprint, password, keytag, NFC, Wi-Fi,
mobile key, mechanical override
Weight
4.8Kg
Product size
(Includes lever)
[Exterior] 88(W) × 400(H) × 60(D)mm
[Interior] 88(W) × 400(H) × 63(D)mm
Components
1
Exterior
Unit
Product specifications
Interior
Unit
•
User Manual
•
Mechanical override
•
“AA" batteries (LR6)
•
Installation components
※
Product components may vary depending on
installation environment.
Interior lever
Names and functions
2
Lower Exterior Unit
Exterior Unit
Fingerprint sensor
Privacy mode LED
Proximity detector
Keypad
Away mode LED
Door LED
Power input
Fingerprint LED
Battery
replacement LED
Keytag sensor
Emergency LED
Reset button
Exterior lever
Entry complete /
Switch to
manner mode
Indication LED
Mechanical
override hole
Latch open
button
Interior Unit
Battery
cover
Battery tray
[OPEN / CLOSE]
button
Proximity sensor
Manual door
lock
Auto / Manual lock
conversion switch
Volume control
switch
Wireless module
cover
Screw cover
Register button
Wireless module
installation unit
Dead bolt
Latch bolt
Door open sensor
Mortise
Open door from outside
3
Fingerprint
The door opens when the registered fingerprint accurately
makes contact with the fingerprint sensor.
Master Password & User Password
❶
Stand close to the door lock and then press the two
random digits displayed. (Randomizer function)
❷
When all buttons on the keypad are displayed,
enter your password (4~12 digits) and then press [*]
to open the door.
TIP
References
• Enter the password when the keypad is turned on. If the keypad is turned off, touch the keypad to
turn on the keypad and then enter the password.
• Error alarm is triggered and the door lock operation is suspended for 3 minutes after entering an
incorrect password 5 times. You can enter the accurate password to open the door once the door
lock suspension disarming alarm is triggered by the door lock system after 3 minutes.
• Press the Security ( ) button when canceling entry after entering an incorrect password to
re-enter the accurate password.
User manner function (sound muted) to open door
Press [*] button when temporarily turning off the sound in the evening and enter password to mute the sound.
Keytag / Mobile Key
The door opens when a registered keytag or mobile key
(smartphone) accurately makes contact with the fingerprint sensor.
References
• Touch the keypad when the welcome function has been disabled and then place the mobile
key on the sensor to open the door.
• You can open the door with mobile key after installing the door lock app and requesting for
the service.
• Mobile key door open function only supports Android mobile phones and devices equipped
with NFC USIM card.
• You can use the mobile key to open the door only when the smartphone screen is on.
• Refer to user guide provided in the app for details.
Use According to the User’s Preference.
Close Door
References
• The interior lever is set as “touch mode” by default.
- Set single-touch mode: It operates by touching only one area
(left / right / top / center of the lever).
- Set multi-touch mode: It operates by touching two or more areas
(left / right / top / center of the lever).
- Deactivate touch mode: It deactivates the interior lever touch mode.
• The door may not open just by touching the lever with other objects (e.g. glove, paper box) or
by holding the bottom part of the lever.
Make sure the proximity sensor is clean to open the door by touching
the interior lever. If there is any foreign material on the sensor,
the interior lever may not operate normally.
Open / Close door from inside
4
Open by touching the interior lever
By touching the interior lever, the proximity sensor detects the
operation and the LED of the [OPEN / CLOSE] button turns green.
Lightly push the lever to open the door.
Open by pressing the [OPEN / CLOSE] button
Press the [OPEN / CLOSE] button on the interior unit to open the door.
Auto lock (A)
The door is automatically locked when closed. (Default)
Manual lock (M)
The door is unlocked even after being closed for unrestricted access. (Party, moving, etc.)
Open by using the manual door lock
Turn the manual door lock to [ ] to open the door.
Proximity sensor
Caution
TIP
How to Configure Auto / Manual Lock
Open the battery cover on the interior unit. Configure with
[Auto / Manual Lock] conversion switch.
A | M
• After enabling manual lock mode, the door can only be locked if the [OPEN / CLOSE]
button is pressed from the inside or if the keypad is pressed from the outside.
• Regardless of the manual lock mode configuration, the door is automatically locked if
the door is not opened within 7 seconds after disabling the lock.
Caution
Registration
and configuration
failed
( X )
Add /
Register
( + )
Registration
and configuration
complete
( O )
Delete
individual
( - )
Each setting can be checked through the door lock keypad.
Press the
[Register] button on the interior unit
if you have to
suspend registration
before completion.
Register authentication method
5
The user can only register the authentication method when the door is open.
After opening the wireless module cover on the interior unit, press the
[Register]
button shortly and the voice guidance for “authentication management” will be played.
Register the authentication mode according to the voice guidance.
※
Registration mode is activated for 60 seconds by default and the door does not lock even if it is closed
within 60 seconds.
※
Read the caution when registering authentication mode. It is recommended to only register when there is
a person present inside the house.
※
Registration mode is terminated automatically when an incorrect password has been entered.
The user can register again after pressing the [Register] button.
Registration Mode
Enter registration mode and then register authentication method (password, keytag,
fingerprint) according to the voice guidence.
※
Registration mode is maintained for 60 seconds by
default and the door does not lock even if it is closed within 60 seconds.
Master password
0
2
1
3
Change master password mode
Register user password mode
Register keytag mode
Register fingerprint mode
TIP
Press the middle part at the bottom of the wireless
module cover located at the bottom of the interior
unit and pull the cover.
Wireless
module
cover
How to easily open the wireless module cover
Register (Add) User Password / Delete
Individual User Password / Delete All User Passwords
You can register up to 100 keytags including passwords and mobile keys.
Registered passwords can be deleted individually or collectively. (4~12 digits)
1
Register
(Add)
Delete individual
password
Delete
all passwords
3
Complete
Complete
1
Password
Password
2
Can be registered
continuously
(Within 60 seconds)
Can be deleted
continuously
(Within 60 seconds)
0
Change Master Password
You can enter 4~12 digits for the password, and you can only register a single master
password. Default password is "1234".
※
You must change the password after installing the product.
New master password
• The user will hear a voice alarm that says “Change the default password” when opening
the door using the default password “1234.”
• Set the password with more than 6 digits to prevent break-ins. (Only numbers 0 to 9 may be used)
• Make sure that the password is secure. Change the password regularly as using the same
password for a long time may increase the risk of being leaked.
• The password cannot be deleted. Register a new password to change to a new one.
• In case of failing to check the changed password, reset the password by initializing the key
information, then change the password again.
Caution
References
• Press the number before pressing the [*] button to listen to the instructions again.
• To check whether the password has been registered normally, press the [Register] button,
then press the password and [*] button to check whether it enters to the registration mode.
• Close the door after checking whether the password has been changed normally.
Register (Add) Fingerprint /
Delete Individual Fingerprint / Delete All Fingerprints
You can register up to 100 fingerprints.
Registered fingerprints can be deleted individually or collectively.
3
Register
(Add)
Delete individual
fingerprint
Delete
all fingerprints
Complete
Complete
3
1
2
Fingerprint
Can be registered
continuously
(Within 60 seconds)
Can be deleted
continuously
(Within 60 seconds)
Fingerprint
Register (Add) Keytag / Delete
Individual Keytag / Delete All Keytags
You can register up to 100 keytags including passwords and mobile keys.
Registered keytags can be deleted individually or collectively.
2
Register
(Add)
Delete individual
keytag
Delete
all keytags
3
1
2
Keytags
Keytags
Can be registered
continuously
(Within 60 seconds)
Can be deleted
continuously
(Within 60 seconds)
Complete
Complete
References
• Press the door open sensor with the door open to artificially close the door, and then open
the door with the keytag (whether the dead bolt goes inside the mortise) to check if
registration has been completed normally.
• Close the door after adding or deleting is complete.
•This product only supports keytags provided by Samsung SDS.
•Warranty is void if the door lock is malfunctioning from opening the door using alternate
authentication method aside from the keytags prescribed by the company.
Caution
When you register a door lock to Samsung Smart Doorlock app, you can use various IoT services
including remote door open, access function, push notification, etc.
Android users can search for ‘Smart Doorlock’ app in Play Store to download and install, and iOS users
can search for ‘Smart Doorlock’ app in the App Store to download and install.
Samsung Smart Doorlock app
Installation and registration
Register button
on the interior unit
5S
TIP
How to Register Wi-Fi
Press [Register] button on the interior unit
for 5 seconds to register Wi-Fi.
• Wi-Fi router must be on to register door lock. When using dual-band router
(2.4GHz, 5GHz), you must select 2.4GHz. (5GHz is not supported)
• Refer to user guide provided by the app for door lock registration method and other
service-related matters.
Caution
※
Number of contacts made by fingerprint appears on the keypad with the ‘Ding’ sound when registering
fingerprint. Register the fingerprints in the same method according to voice guidence when adding fingerprints.
Press the [Register] button on the interior unit when registration is complete.
How to Register Fingerprint
Place a finger on the fingerprint sensor to register.
Change the angle of the finger 6 times and make contact with
the sensor when registering a fingerprint.
❶
❷
❸
❹
❺
❻
References
• It is recommended to register thumbs or index fingers when registering fingerprints.
• Register the fingerprint for a finger you use often if you wish to improve fingerprint recognition
rate.
• Recognition rate may be low if it is a fingerprint of a child or if the fingerprint is faint
(or damaged). Fingerprint may not register or be recognized in such instance.
• If the surface of the fingerprint is too rough (damaged or bubble present on the finger),
fingerprint may not be recognized. Recognition rate may suffer if the finger is too small or thin,
or if the finger is bent, or if only the fingertip is used for authentication. You must cover the
entire fingerprint sensor with your finger when registering your fingerprint.
• If the fingerprint sensor or the finger is dirty or wet, try again after wiping.
• If the surrounding environment is dry, static may occur for the product. In such an instance,
avoid using fingerprint recognition or make contact with another metallic object before
fingerprint recognition to eliminate static and try again.
• Be careful not to scratch the fingerprint sensor with coins, keys, necklaces, and other
metallic objects.
• Close the door after checking that the fingerprint has been added or deleted accurately.
