BN68-05196A-03
QUICK START
GUIDE
Step 1
Attach the TV to the Stand
1A
Remove the product boxes on both sides of Velcro
tapes.
1B
Pull apart the cardboard packaging, as shown by the
figure.
1C
Pull the Styrofoam cushioning off of the TV in the
order indicated by the figure.
1D
1E
1F
1G
One person holding the TV in front of the TV, two people can fit into
the hole in the TV. Two people stand the TV, screws into the holes of
the product. Another one on screws into both sides of the TV.
1H
1I
1J
Pull the cushion that is fixed on top of the product
toward the front of the TV. Please remove the
cushion up.
Pull the clips off of the sides of the frame.
1K
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make sure
you have the accessories listed below.
Included in this box
One Connect Accessories:
One connect, one connect cable
Stand
Also included: User manual, regulatory guide, antenna cable,
IR extender, component adapter, RCA adapter x 2, power cord
Smart Touch Control &
Batteries (AAA x 2)
DELPHINUS
Screw
x 8 (M4 x L6)
Step
1
Attach the TV to
the Stand
Step
2
Connect video
devices
Step
3
Using the Smart
Touch Control
Step
4
Power on and
start the initial
setup
3D Glasses Accessories:
3D Active glasses, USB charge cable
✎
Use the screws that are contained in the accessories box.
[UN85S9AF_QSG]BN68-05196A-03ENG.indb 2
2013-08-01 �� 2:30:04
