background image

Connecting the USB cable

1

Connect a USB cable to the USB port on the computer.

2

Connect the opposite end of the USB cable to the 
USB cable port on the right side of the yepp.

● 

If you disconnect the USB cable from your PC while 
implementing a command or initializing during 
USB driver installation, your PC may not function correctly. 

3

The USB driver is installed with a message saying that it
is searching for a new device. You may not see the
display screen during installation.
Go to the device manager to check that 
installation has been successfully completed. 

4

Upon installation of the USB driver
"SAMSUNG YP-60” 

will appear in the

[Start]

[Settings]

[Control Panel]

[System Properties]

[Device Manager].

Before connecting the yepp to PC, make sure to install yepp Studio.

Location of Controls

Turning Power On and Off

Playing Music

Pausing Music

2

1

YP-60 Quick Guide

ENC/NAVI. 

Button

Move to Track/

Speed Search Button

Volume Button

MENU/
Loop Repeating Button

Sports Function Button

Play/Stop/Pause
On/Off Button

Display

Hold Switch

Reset Hole 

USB Cable 
Connection Port

ENC Jack

Earphone Jack

Heart Rate Measurement Sensor

Power On :

Press and hold the       button to turn on the power.

Power Off :

Press and hold the       button to turn off the power.

Press the     button.

Playback starts.

Press the      button to pause playback.

While in Pause mode, briefly press      again to resume playback.

If the device won’t respond even after pressing the buttons, 
reboot it by pressing the Reset Hole with a pin.

USB connect cable

Reviews: