1
Model 50 Digital Message On Hold Player Manual
The Model 50 Digital Message On Hold Player will plays mp3 files form a USB Thumb Drive. Note that bo music /
message is played when you remove the USB Thumb Drive from the player (it will be silent).
Inserting the USB Thumb Drive will automatically start playing any mp3 audio file(s) in the root of the USB Thumb Drive
within 10 seconds.
When you create your own mp3 files use 64kbps or greater Stereo mp3 files for the best audio quality. The Model 50
Digital Message On Hold Player will
not
play wav or other types of audio files.
The Model 50 Digital Message Player comes with
two
USB Thumb Drives:
• #1 has the default generic On Hold audio.
• #2 has other generic On Hold files you might like,
and
• Sample files that let you create your own music and voice files to play in
alphanumeric order
• Audacity for Windows – a free open source audio editor available for Windows, MAC and Linux.
Easily change the On Hold announcement whenever you need to with the USB Thumb Drive.
The Model 50 Digital Message On Hold Player has
600 ohm RCA jack output, which is normally connected to a MOH
input on a phone system.
There is a Speaker Switch on the front panel that lets you easily monitor what’s being played. Leave the Switch in the OFF
position for normal operation.
The Model 50 Digital Message Player comes with an RCA to RCA Audio Cord, a Power Cube, Mounting Screws for wall
mounting and Feet to put it on a shelf.
