LED15
ASSEMBLY INSTRUCTIONS:
No tools required (Hammer optional).
Retain carton for storage.
1. Carefully remove all parts from the carton. Your tree should
include the following (Fig 1):
1 collapsible tree base
1 trunk with control box and plug
1 top branch tree section
1 Bag containing:
1 remote control
9 Volt battery
Replacement RGB/LED bulbs
Extra branch safety tips
4 Lawn stakes
ASSEMBLY OF TREE STAND:
1. Open the two sides of the hinged collapsible tree base and
place on level ground in your desired display location (Fig 2).
Fig 2
2. Locate the 4 swing arm hooks that are clipped midway on the
tree trunk (clipped for storage purposes only) (Fig. 4a).
3. Unclip the 4 swing arm hooks and lower all 4 swing arm hooks
to the tree's base (Fig. 4b).
4. Insert the hooks from the 4 swing arms into the eyelets
located on the trees base (Fig. 5).
ASSEMBLY OF THE TREE:
1. Insert the tree’s trunk into the tree’s
base (Fig 3).
Fig 3
Fig 5
Fig 4a
Fig 4b
5. Lift the "top branch tree
section" and insert into the
top of the tree's trunk.
Align and position the base of
the "top branch tree section"
into the "V" opening on the
top of the tree's trunk (Fig. 6).
6. Insert the 2 swing arm hooks
(located at the bottom of the
"Top branch tree section")
into the eyelets located on
top portion of tree's trunk
(Fig. 7).
7. Make the only male to female
coaxial connection needed;
the "top branch tree section"
to the trees trunk. (Matching
label #1 to label # 1) (Fig. 7a)
Fig 6
Fig 7
Please follow the instructions below in order to effectively
assemble and disassemble your outdoor tree.
In the event that you should encounter any issues during the assembly
of your tree; please refer to the “Troubleshooting” portion of this manual
or call our toll free customer service number at 1-888-831-6656, and a
trained representative will assist you.
Customer service hours of operation:
Monday-Friday: 8:00am – 4:30pm CST.
Holiday weekends:
Last weekend in November: 8:00am – 4:30pm CST.
First weekend in December: 8:00am – 4:30pm CST.
Visit us on the web at www.santasbest.com
OUTDOOR BARE BRANCH TREE
SCULPTURE
Fig 7a
1
1
1
1
1
1
Fig 10
Fig 8
3. Proceed to now shape the
tree. The main branches, along
with the branch tips, are
flexible, and should be spread
open to mirror that of a real
bare branched tree (Fig 8).
1. Remove the velcro straps, binding the branches of the “top
branch tree section” together; being careful that the potential
spring release of the branches does not cause injury.
2. Begin to gently guide the hinged branches downward to a
desired position, being careful not to cause injury from the
branch tips.
NOTE: The top 3 branches are not hinged; they must be guided
into a desired position.
SHAPING OF THE TREE
Fig 1
Collapsible
tree base
Replacement RGB/LED bulbs,
branch safety tips and
9 volt battery
Top branch tree section
Lawn stakes
Trunk with control box
and plug
remote control
4. To illuminate fully insert the plug into a working GFCI outlet or
an outdoor rated extension cord.
5. Push or gently hammer support stakes into the ground
securing the tree base. Angle each stake 45 degrees toward
the center of the tree (Fig 9).
Fig 9
You have completed the
assembly of the tree (Fig 10).
REMOTE CONTROL OPERATION
Included is the remote control that operates the color and
function of your outdoor tree.
Before operation; a standard 9 volt battery (6F22, 6LR61 or
23F6-220) must be installed into the remote control; by simply
removing the slide plate located on the back of the remote control.
The tree's 56 lighting function capability is controlled solely by
the use of the remote control provided.
By simply depressing the color, function or ON/OFF button on
the remote control; indicator lights will keep you on track as to
the exact color and function that you are currently on.
Select your favorite color and your favorite function!
NOTE: When the tree is turned OFF by the use of the remote
control; and is then turned back ON by the use of the remote
control; the tree will resume the memory of the last color and
function that was selected on the remote control.
TIMER FEATURE
Activating the timer mode:
Simply press the "timer" button on the remote
control once (every other light on your tree sculpture
will then flash RED 3 times) your tree's 6-hour timer
has now been activated.
Deactivating the timer
mode:
Depress the "timer" button
once again (every other light
on your tree sculpture will
then flash GREEN 3 times)
your tree's timer feature has
now been deactivated.
PLEASE NOTE:
The moment that the "timer"
button is pressed (activated),
your tree sculpture will
remain ON for exactly 6
hours. The tree will then
automatically turn back ON
exactly 18 hours later.
Made in China
Printed in China
This is not a toy, for decorative use only.
Distributed by Santa’s Best®
Riverwoods, IL 60015 USA
www.santasbest.com
NOTE: Check the item for any loose, unlit or damaged
bulbs. Although it will still operate, the bulbs must be
replaced promptly to ensure the performance and life
expectancy of the item.
NOTE: Replacement bulbs are provided. This is a specialty
bulb. Do not replace with a standard LED or Incandescent
bulb. Should you need additional bulbs please call our
customer service department at 1-888-831-6656.
To determine which color replacement bulb is needed;
select “Steady” function and “Christmas” color on your
remote control.
1. If the tree does not illuminate press the on/off button on your
remote control. If failure to light persists the battery may need to
be replaced. Insert a standard 9 volt type battery (6F22, 6LR61 or
23F6-220); aligning the appropriate ( +/- ) markings accordingly.
NOTE: By changing the remote angle slightly, or reducing
your distance from the sculpture, you may achieve better
remote control reception.
If the tree fails to light due to a damaged or defective
remote control; a new remote control can be provided
through our customer service center.
2. A delayed response, while switching between color selections
on the remote control, is in no way a malfunction of the light set,
but is a normal operating response due to the complexity of the
technology.
All bulbs must independently receive their signal to alter to the
correct color selected. Some bulbs receive their signals quicker
than others, hence a delayed receiver response may occur.
Again, this is a normal response based on the technology.
3. If a branch light set is unplugged from the trunk and then
plugged in and branches don't synchronize, unplug the tree at
the GFCI outlet and plug in again and all functions/colors should
be the same on the whole tree.
TROUBLESHOOTING
• 11 colors Options - White, Red, Green, Blue,
Yellow, Purple, Amber, Spring (Blue, Yellow,
Purple), Patriotic (Red, Pure White, Blue), Fall
(Green, Purple, Amber), Christmas (Red, Green,
Blue, Yellow, Purple, Amber).
• 5 functions per color - Steady, Glisten, Firefly,
Twinkling, Flash.
• + Color Morphing (7 colors – White, Red, Green,
Blue, Yellow, Purple, Amber).
56 TOTAL LIGHT SETTINGS
1. Leave assembled if storage room permits or disassemble,
placing all components in the original carton.
2. Store in cool, dry location away from sunlight.
NOTE: Store your remote control in a SAFE & DRY location
and remove the battery from remote control before storage.
STORAGE INSTRUCTIONS
18”
15”
