Bluetooth
on
Available Devices
SANYO_FWSB405F
Pairing...
Passcode:
0000
1
Connect to a TV
2
Plug the AC plug into an electrical outlet
3
Turn Soundbar on
For Bluetooth connections, refer to “BLUETOOTH SETTING”.
4
Select the source Lights up when you
switch to your connected source.
or
© 2015 Funai Electric Co., Ltd.
Printed in China
XHA01UH
★★★★★
Install 2 AAA (1.5V) batteries (Not supplied)
Button
Specification
ENGLISH
ESPAÑOL
1
POWER
Press to Turn On the unit, or to switch
the unit into Standby mode.
(To completely Turn Off the unit, you
must unplug the AC power cord.)
Presione para encender la unidad, o para
cambiar la unidad en modo de Espera.
(Para apagar completamente la unidad,
debe desconectar el cable de energía
CA.)
2
VOL +/-
Press to adjust volume up / down for
Soundbar.
Presione para subir / bajar el volumen
para Soundbar.
3
MUTE
Press to mute the sound and recover the
sound.
Presione para silenciar el sonido y
recuperar el sonido.
4
BASS
K
/
L
Press to adjust lower-pitched sounds.
Presione para ajustar sonidos de tono
bajo.
5
TREBLE
K
/
L
Press to adjust higher-pitched sounds.
Presione para ajustar sonidos de tono
alto.
6
AUX
Press to select AUX of connected
devices to this Soundbar.
Presione para seleccionar AUX de
los dispositivos conectados a este
Soundbar.
7
LINE
Press to select Line of connected devices
to this Soundbar.
Presione para seleccionar Línea de
los dispositivos conectados a este
Soundbar.
8
OPTICAL
Press to select Optical of connected
devices to this Soundbar.
Presione para seleccionar Óptico de
los dispositivos conectados a este
Soundbar.
9
Bluetooth
Press to select Bluetooth of connected
devices to this Soundbar.
Presione para seleccionar Bluetooth
de los dispositivos conectados a este
Soundbar.
10
PAIR
Press to disconnect the currently
connected Bluetooth device and start
pairing mode to establish a new
connection to another Bluetooth device.
If no Bluetooth device is connected
within 2 minutes, press this button to
restart pairing mode. Pairing mode
can only be started when Bluetooth is
selected.
Presione para desconectar el dispositivo
Bluetooth conectado actualmente y
comenzar el modo de conexión para
establecer una nueva conexión a otro
dispositivo Bluetooth. Si no se conecta
un dispositivo Bluetooth dentro de
2 minutos, presione este botón para
reiniciar el modo de conexión. El modo
de conexión sólo puede iniciar cuando
se selecciona Bluetooth.
ENGLISH
Problem
Tip
No Power
• Unplug the outlet once, and wait for 15-20 seconds and then
plug it in again.
No Sound
• Make sure both the TV or other devices and the Soundbar are
Turned On.
• Confirm the connections to the TV are made properly as shown
in CONNECTIONS.
• Press the source button on your Soundbar remote control for the
correct audio input.
• Confirm that the Soundbar is not muted. Press VOL +/- to
unmute the sound. (See ‘Adjust the volume’ on page* )
• For optical audio connection, select another audio signal on the
connected external device. (This product supports LPCM)
• Depending on the usage and usage environment, chatter sound
and distorted sound may be generated. To reduce such sounds,
lower the volume.
Distorted sound
• Adjust the sound settings of the connected device.
• Decrease the volume on the connected Bluetooth device.
No reaction to the
remote control.
• Check the batteries in the remote control, and make sure they
are inserted properly by + or - symbols.
• Aim the remote at the center of this unit.
• If the remote control does not work and all LED’s of the
Soundbar stay lit for over 30 seconds, there is a failure in the
electrical system. Unplug the AC power cord and contact the
service center.
An external device
cannot connect with
the Soundbar via
Bluetooth.
• Confirm that Bluetooth is enabled on the external device. See
the Owner’s Manual of the external device on how to enable
Bluetooth.
• If reconnecting the Bluetooth device to the Soundbar fails,
delete the registered profile of this Soundbar from the Bluetooth
device, then perform pairing again.
• Another Bluetooth device is already connected to the Soundbar.
Disconnect the connected device, then try again.
Unstable connection
between the
Bluetooth device and
the Soundbar.
Or
Poor sound quality
from the connected
Bluetooth device.
• The Bluetooth reception may be poor. Confirm that there is no
obstacle between the Bluetooth device and the Soundbar. If this
does not improve the sound quality, move the Bluetooth device
closer to the Soundbar.
* 2 V M N 0 0 2 1 6 *
1
2
3
1
4
10
7
2
5
3
6
8
9
SETUP MANUAL
Soundbar
CONNECTIONS
TROUBLESHOOTING
REMOTE CONTROL
See
the
Online
Owner’s
Manual
for
details
:
sanyo-av.com
Step 1 Please visit website
sanyo-av.com
Step 2 Select Download.
Step 3 Type in the Model # “FWSB405FS”, and click “Search”.
Step 4 Select the Manual, and click on “Download”.
SANYO is a registered trademark of SANYO Electric Co., Ltd. and is used by Funai Electric Co., Ltd.
and Funai Corporation, Inc. under license from SANYO Electric Co., Ltd.
Any liability related to SANYO products, including design and quality, is the sole responsibility of
Funai Electric Co., Ltd. and Funai Corporation, Inc.
Please contact Funai Corporation, Inc. for any questions or claims related to SANYO products:
sanyo-av.com
FWSB405FS
SUPPLIED ACCESSORIES
• Remote Control (NC300UH)
• Setup Manual
• Line-in Cable
INSERT BATTERIES
BLUETOOTH SETTING
1
Press
on the remote control to switch the
Soundbar to Bluetooth mode.
2
Turn On the Bluetooth compatible device.
3
On the Bluetooth compatible device, search for and
select “SANYO FWSB405F” to pair (or register) your
Soundbar with the Bluetooth compatible device.
• If a Passcode is requested, enter “0000.”
• If the Soundbar name does not appear on the
Bluetooth compatible device, press
on the
remote control.
4
Play music on the connected Bluetooth compatible device.
5
To exit Bluetooth mode, press one of the other audio
input source buttons on the remote control.
If reconnecting the Bluetooth device to the Soundbar fails, delete the registered
profile of this Soundbar from the Bluetooth device, then perform pairing again.
This unit can store up to 4 device profiles.
Line-in Cable
OPTICAL Cable
(not supplied)
AUDIO OUTPUT
OPTICAL OUTPUT
DIGITAL AUDIO OUT
(OPTICAL)
HEADPHONE
or
or
If your TV does not have audio outputs shown
left, to connect the Soundbar directly to your
other devices (Blu-ray player, game system,
etc.) see your device’s user manual.
Use a Coaxial (RCA) to Optical Toslink
Digital Audio Converter (not supplied)
for our Soundbar which only has an
optical input.
BEST
GOOD
NOTE
• Make sure the unit is Turned Off when connecting.
• Check whether the connction for all cables are connected tightly.
• If you connect with a Line-in cable, make sure the volume for the
headphone output is appropriate for the Soundbar input. If the
Line-in volume is too soft, the Soundbar may not output sounds
with appropriate volume.
ESPAÑOL
Problema
Solución
No hay energía
• Desconecte el tomacorriente una vez, y espere 15 -20 segundos, y
vuélvalo a conectar.
No hay sonido
• Asegúrese que tanto la TV como otros dispositivos y Soundbar
estén encendidos.
• Confirme que las conexiones a la TV estén realizadas correctamente
como se muestra en CONEXIONES.
• Presione el botón de fuente en el control remoto de Soundbar para
la entrada de audio correcta.
• Confirme que SoundBar no esté en silencio. Presione VOL +/- para
quitar el silencio al sonido. (Vea ‘Ajuste de volumen’ en la página* )
• Para la conexión óptica de audio, seleccione otra señal de audio en el
dispositivo externo conectado. (Este producto soporta LPCM)
• Dependiendo en el uso y el ambiente de uso, se puede generar
sonido de traqueteo o sonido distorsionado. Baje el volumen para
reducir tales sonidos.
Sonido distorsionado
• Ajuste los ajustes de sonido del dispositivo conectado.
• Disminuya el volumen en el dispositivo Bluetooth conectado.
No hay reacción al
control remoto.
• Revise las baterías en el control remoto, y asegúrese que estén
insertadas adecuadamente por los sí o -.
• Apunte el remoto en el centro de esta unidad.
• Si el control remoto no funciona y todos los LED de Soundbar
permanecen iluminados durante más de 30 segundos, existe una
falla en el sistema eléctrico. Desconecte el cable de energía CA y
póngase en contacto con el centro de servicio.
Un dispositivo
externo no se
puede conectar con
Soundbar por medio
de Bluetooth.
• Confirme que Bluetooth esté activado en el dispositivo externo. Vea
el manual del propietario del dispositivo externo sobre cómo activar
Bluetooth.
• Si falla volver a conectar el dispositivo Bluetooth al Soundbar, borre
el perfil registrado de este Soundbar del dispositivo Bluetooth, y
después vuelva a realizar la conexión.
• Otro dispositivo Bluetooth ya está conectado al Soundbar. Desconecte
el dispositivo conectado y después intente de nuevo.
Conexión inestable
entre el dispositivo
Bluetooth y Soundbar
O
Calidad de sonido
deficiente desde el
dispositivo Bluetooth
conectado.
• La recepción de Bluetooth puede ser deficiente. Confirme que no
haya un obstáculo entre el dispositivo Bluetooth y Soundbar. Si esto
no mejora la calidad del sonido, mueva el dispositivo Bluetooth más
cerca del Soundbar.
WALL MOUNT THE SOUNDBAR
(OPTIONAL)
190m
m/7.5
’’
3.5~4mm/0.14’’ ~0.16’’
>25mm/0.98’’
4mm/0.16’’
~5mm/0.2’’
~9mm/0.35’’
NEED HELP?
Please visit our website sanyo-av.com for the online Owner’s Manual and contact
form or call 1-866-212-0436.
If you do not find a solution above, please visit our website sanyo-av.
com for the Online Owner’s Manual. Please download it and then refer to
“TROUBLESHOOTING” section for more information.
XHA01UH̲SU̲v1.indd 1
XHA01UH SU 1 i dd 1
2015/06/29 15:25:52
2015/06/29 15 25 52
