background image

SERVICE MANUAL

Contents

1. OUTLINE OF CIRCUIT DESCRIPTION ............................... 3
2. DISASSEMBLY ................................................................... 12
3. ELECTRICAL ADJUSTMENT ............................................. 17
4. USB STORAGE INFORMATION REGISTRATION ............ 21
5. TROUBLESHOOTING GUIDE ............................................ 22
6. PARTS LIST ........................................................................ 23
CIRCUIT DIAGRAMS & PRINTED WIRING BOARDS ........... C1

CAUTION : Danger of explosion if battery is incorrectly replaced.

Replace only with the same or equivalent type recommended by the
manufacturer.
Discard used batteries according to the manufacturer’s instructions.

NOTE : 1. Parts order must contain model number, part number, and description.

2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.

Design and specification are subject to change without notice.

SX817/U, EX, EX2, EX3 SVA07/U, EX (R)

REFERENCE No. SM5310676

FILE NO.

Digital Movie Camera
AC Adaptor

VPC-CA6OR

(Product Code : 168 056 01)
(U.S.A.) (Canada) (Korea) (Taiwan)

VPC-CA6EXOR

(Product Code : 168 056 02)
(Europe) (U.K.) (South America)
(China) (Australia) (Hong Kong)
(Russia) (Middle East) (Africa)
(General) (Korea) (Taiwan)

RoHS

This product does not contain any hazardous substances prohibited by the RoHS
Directive.

WARNING

You are requested to use RoHS compliant parts for maintenance or repair.

You are requested to use lead-free solder.

 (This product has been manufactured using lead-free solder. Be sure to follow the

warning given on page 2 when carrying out repair work.)

VPC-CA6EX

(Product Code : 168 056 06)
(Europe) (U.K.) (South America)
(China) (Australia) (Hong Kong)
(Russia) (Middle East) (Africa)
(General) (Korea) (Taiwan)

VPC-CA6EXBL

(Product Code : 168 056 08)
(Europe)  (U.K.) (South America)
(China) (Australia) (Hong Kong)
(Russia) (Middle East) (Africa)
(General) (Korea) (Taiwan)

VAR-G8U

(Product Code : 126 301 33)
(U.S.A.) (Canada) (Korea) (Taiwan)

VAR-G8EX

(Product Code : 126 301 34)
(Europe)  (U.K.) (South America)
(China) (Australia) (Hong Kong)
(Russia) (Middle East) (Africa)
(General) (Korea) (Taiwan)

Summary of Contents for VAR-G8EX

































Reviews: