AxisBlu™ Pairing Instructions
GENERAL NOTES
• You will need to navigate to the Google play or the Itunes App store to download the AxisBlu™ application.
• The device will require Bluetooth version 4.2 or higher.
• When pairing the device, you will need to know your pairing code. Pairing code can be found on the back of the Bluetooth module and in the supplied envelope .
•
THE PAIRING CODE SHOULD BE RETAINED IN AN ACCESSIBLE LOCATION IN THE EVENT OF A MODULE RESET, OR PAIRING OF NEW DEVICE.
• AxisBlu™ will support 1 primary phone and 4 additional phones. The primary phone will be the initial phone connected to the Bluetooth module.
• The Bluetooth module will leave its “white list” open for pairing until the primary mobile device has been connected. After the initial pairing, the “white list” will not be
open again until the user selects the ADD PHONE option in the mobile app.
Sargent & Greenleaf S.A.
9, Chemin du Croset
1024 Ecublens, Switzerland
Phone: +41-21 694 34 00
Fax: +41-21 694 34 09
Document 630- 945
Revised 10/22/2018
Sargent & Greenleaf, Inc.
One Security Drive
Nicholasville, KY 40356 USA
Phone: (800)-826-7652
Fax: (800)-634-4843
Copyright
©
2018, Sargent & Greenleaf, Inc.
IOS PAIRING
1
Navigate to the AxisBlu™ Icon and click to start up the application. The default startup will show the device is not connected.
2
In the bottom right corner click on the icon. This will open the application options.
3
You will see three selections:
Reconnect
-
Connect to device
Instructions
-
Operating instructions
Add Phone
-
Add additonal phones
4
Click on the Reconnect Icon.
5
Click the name of your AxisBlu™ device to connect.
6
The system will ask for the pairing code. The pairing code is located on the back of the Bluetooth module or in the coin envelope . Enter the 6
digit pairing code found on the label.
7
Once pairing is completed, use the
CONNECTING
section to connect the device to the lock.
ANDROID PAIRING
1
Navigate to the AxisBlu™ Icon
and click to startup the application. The default startup will show the device is not connected.
2
In the bottom right corner click on the icon. This will open the application options.
3
You will see three selections:
Reconnect
-
Connect to device
Instructions
-
Operating instructions
Add Phone
-
Add additonal phones
4
Click on the Reconnect Icon and click on Bluetooth Settings.
5
Click the name of your AxisBlu™ device to connect under “AVAILABLE DEVICES.”
6
The system will ask for the pairing code. The pairing code is located on the back of the Bluetooth module or in the coin envelope. Enter the 6
digit pairing code found on the label.
7
Once pairng is completed, use the
CONNECTING
section to connect the device to the lock.
