background image

1

A8130C

Copyright © 2011, Sargent Manufacturing Company, an ASSA ABLOY Group company.  

All rights reserved. Reproduction in whole or in part without the express written  

permission of Sargent Manufacturing Company is prohibited.

INSTALLATION INSTRUCTIONS

7800 MORTISE LOCK WITH PT PADDLE TRIM

FOR INSTALLATION ASSISTANCE, CALL SARGENT AT 1-800-727-5477 • www.sargentlock.com

TOOLS REQUIRED

•  Phillips screwdriver #2
•  Drill
•  7/46" Drill Bit (Wood Door)
•  #8-32 Tap (Metal Door)
•  0.136" (#18) Tap Drill
•  Screw Pack with screws for lockbody, 

fronts & strike screws (part # 77-4236)

• T15 torx bit
• 1/8" Allen key

Summary of Contents for 7800

Page 1: ...t Manufacturing Company is prohibited INSTALLATION INSTRUCTIONS 7800 MORTISE LOCK WITH PT PADDLE TRIM FOR INSTALLATION ASSISTANCE CALL SARGENT AT 1 800 727 5477 www sargentlock com TOOLS REQUIRED Phillips screwdriver 2 Drill 7 46 Drill Bit Wood Door 8 32 Tap Metal Door 0 136 18 Tap Drill Screw Pack with screws for lockbody fronts strike screws part 77 4236 T15 torx bit 1 8 Allen key ...

Page 2: ...ill be tightened once trim is installed Install Cylinder For non cylinder functions proceed to STEP 3 Thread the cylinder into the lockbody Verify the cylinder is flush with the collar and the name is horizontal Secure cylinder with cylinder clamping screw located above the deadbolt opening Verify the cylinder functions correctly THRU BOLT THRU BOLT CHASSIS SPRING Vertical Mounting Horizontal Moun...

Page 3: ...crews through the inside chassis Do not tighten fully at this point Lockbody screws on edge of door are to be securely fastened at this point Level chassis Tighten thru bolt screws Attach the outside front plate to lock front with 2 8 32 x 1 4 flat head screws Tighten all screws firmly be sure not to over tighten Insert paddle in slot Install set screw Slide cover over paddle and align with mounti...

Page 4: ... 3 4 thick door NOTE Trim one side functions always require an inside trim assembly which can be used on the inside or outside of the door U S Patent Pending No 5 678 870 How To Change Hand of Lock INSIDE INSIDE OUTSIDE OUTSIDE LEFT HAND LEFT HAND REVERSE BEVEL RIGHT HAND RIGHT HAND REVERSE BEVEL DOOR HANDS DETERMINED FROM OUTSIDE DOOR HANDING Note Beveled surface of latch must face strike The dea...

Reviews: