background image

 

 
SCHAKO | Ferdinand Schad KG 

 

Phone 

+49 (0) 7463-980-0 

Steigstraße 25-27 

 

Fax   +49 (0) 7463-980-200 

D-78600 Kolbingen 

 

www.SCHAKO.de  |  info@SCHAKO.de

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

USABILITY CERTIFICATES 

 

Performance Reliability Certificate

  

0761 – CPR – 0506 

 

Declaration of Performance

  

DoP-ERK-SO-2016-07-01 

 
 
 
 

CLASSIFICATION AND STANDARDS 

 

Classification 

according to EN 13501-4 is EI  90 (v

edw

, h

ow

 

i

o) S 1000 C

10000

 MA multi, depending on 

the mounting situation 

 

Product standard

 

EN 12101-8 

 

Test standards

 

EN 1366-2 and EN 1366-10 

 

 
 
 

PERFORMANCE DATA 

 

For ventilating smoke in smoke extraction 
systems and for providing the necessary sup-
ply air within the smoke extraction installa-
tion 

 

For use in solid walls, ceilings and smoke ex-
traction lines 

 

For automatic (AA) or manual (MA) triggering 

 

SPECIAL FEATURES 

 

Thermally insulated actuator housing 

 

The installation position does not depend on 
the air flow direction or the position of the 
damper blade axle 

 

Reversible OPEN/CLOSED actuator with 
24 V AC/DC or 230 V AC s upply voltage 

 

Optional actuator with Powerline SLC bus 
technology possible. 

 

In conjunction with additional communication 
devices it is possible to retrieve further data, 
for example indication of end position, keep-
ing timeframe (<60 s) or torque monitoring. 

 

ERK-SO

Smoke extraction damper 

TECHNICAL DOCUMENTATION 

with installation, mounting and operating instructions

Summary of Contents for ERK-SO












































Reviews: