Name and function of each part
Handle
Can open the door at anytime only
by pulling down this handle.
Battery cover
Push up to open the battery cover.
Communication pack socket
Auto / Manual mode switch
[Auto lock] Mode
door will be locked automatically
after closing.
[Manual lock] Mode
door will be locked with pressing
manual lock button after closing.
Indicator lamp
[Manual locking] button
Button to lock the door by manual at
manual locking mode.
[Double locking] button
Button to set double locking mode.
1.
Front Ass`y
2.
Back Ass`y
Name
Product specification
Remark
① Front Ass`y
84mm(W) x 260mm(H) x 21mm(D)
Including rubber
pad
② Back Ass`y
82mm(W) x 242mm(H) x 34mm(D)
③ Back bracket
70mm(W) x 119.5mm(H) x 6.6mm(D)
④ Strike
35mm(W) X 106mm(H) X 6.3mm(D)
⑤ Strike housing
21mm(W) X 106mm(H) X 19.5mm(D)
⑥ Mortise lock
105.4mm(W) X 110mm(H) X 25mm(D)
⑦ Card key
ISO card, Tag key, Mobile tag key
⑧ Handle shaft
96mm(W) X 8mm(H) X 8mm(D)
⑨ Handle shaft clip
2 EA
⑩ Emergency key
3 EA
⑪ Battery
1.5V 'AA' Size LR6 Alkaline, 4ea(DC 6V)
⑫ Screws
1 set
⑬ User manual
Main User manual
⑭ Installation template
Using for making hole at the door
⑮ Communication pack
Communication pack
Optional
⑯ Remote key
Remote key
Optional
※ Installation condition Door thickness 40~80mm
S-5600
Panic release handle type
It facilitates escapes while in danger opening easily with a simple
action of lever down.
High reliance mechanical mortise lock type
It has hight reliability mechanical mortise lock type with
installing the locking device on door body inside.
Free-direction mortise lock type
The mortise lock of this product facilitates easy adjusting to left
or right handle direction.
Auto-relocking function
If users do not open the door after unlocking, it is to be locked
automatically for higher security.
Volume control
8 levels of volume.
One touch mute function
Open the door in quite not to interrupt neighbor without any
operating sound temporarily.
Low battery indicator and alarm for battery
replacement time
Low battery indicator with alarm sound shows battery
replacements time.
Trespass alarm function
When the door is opened by force with hammer or other lock is
suspended with alarm sound.
Prevent mischief & hacking
With 5 times of abnormal try with wrong number, function of
door lock is suspended for a while with alarm sound.
Three
way solution
(PIN code, card key, emergency key)
Available to use one solution of PIN code, card key,
emergency key.
Disable function when missing PIN code or card keys
Automatically, deleted old PIN code or card key information
when registering new one.
Random security coding function
When you enter your home with someone, you don`t want to
show PIN code to them. In his case, you may press any number
randomly without limitation and then enter your PIN code at
final. Then you can open the door without revealing your PIN
code.
Auto lock function
When the door is closed, to be locked status automatically.
①
③
②
⑬
⑭
Screws
User
manual
⑫
④
⑤
⑥
⑨
⑪
⑩
⑧
Installation
template
Factory setting
Item
Setting Status
Ref.page
Auto/Manual lock mode
[Auto-lock]
8
Beef sound level (1~8 level)
8 level
7
Factory setting PIN code
123456
-
USER MANUAL
Notice
Please read this manual before installation and
operation.
Safety precautions
Product features
Do not disassemble or alter the lock.
Assembling or disassembling the door lock may damage the product.
Damages to the product caused by unauthorized persons may result
in damages to your property. Please contact our customer service.
If the product generates harmful gases and
smoke.
Please remove the batteries immediately from the product, if you
do not take this step immediately, the product may suffer server
damage.
Please keep the product away from water or any
liquids.
If the product is exposed to salty water or liquids, please wipe off the
moisture with a soft cloth. If moisture or foreign materials penetrate
the product, remove the batteries immediately and contact the
service agency or customer service center for advice. Using a product
contaminated with foreign may cause problems.
Please check the batteries every 6months to
see if the batteries are leaking and to check the
cleanliness of battery terminals.
If leakage is discovered, please wipe out with a dry cloth and replace
the new batteries. In case of exposure to leakage, wash with soap
and water immediately.
Do not clean the product with flammable
materials such as alcohol, benzene or thinners.
Such materials may damage the surface or cause a fire.
Batteries should not be exposed directly to heat
source or flames.
Batteries should not be exposed directly to heat source or flames or
submerged in water, because they may leak or explode, resulting in
severe damage. Please do not use damaged batteries.
Do not allow the battery electrodes to contact
metals such as key holders.
As the battery may overheats, cause explosion or severe damage.
Please do not close the door with the deadbolt in
the locked position.
It may damage the product or cause a malfunction.
Do not force to pull the front cover.
It may damage the product or cause a malfunction.
Please do not mix old with new batteries or use
different types.
The battery life is getting shorter and it may cause a leaks or
explosions.
It may damage the product when installed on a
heavy dew condensation door.
Dew condensation; small drops of water that form when warm air
touches a cold surface. Please check the environment for install
area. Heavy dew condensation may damage the product or cause a
malfunction.
Product composition and components
Remote key
(RP-20)
Communication pack
(RXP-10)
Optional parts
⑮
⑯
⑦
ISO
CARD
Tag
key
M
key
Handle
Can open the door by pushing
down it after pressing PIN code or
touching card key.
Status indicator
Indicate operation status and
checking battery capacity.
˙ Remaining battery 20%
˙ Remaining battery 50%
˙ Remaining battery 80%
Touch numeric pad
Override key
open the door with override
key by manual.
External emergency power
supply terminal
When battery does not operate,
product may be operated and
unlocked by contacting 9V on
terminal located outside.
Card key touch plate
Touch the registered card key to
open the door.
Wireless interlock
Lock / Unlock lamp
Indicate lock / unlock status.
Battery replacement
indicator
When the battery is low, red light
flickers. Please change batteries.
[N], [S], [ ] Button
˙[N] : Registration or deletion of PIN
code, Card in normal mode
˙[S] : Registration or deletion of PIN
code, Card in safety mode
˙[ ] : To register or delete optional
RF communicatio module.