background image

QUICK RELEASE THREE-WAY FILL SIDE 

LEVER GREASE GUN

MODEL NO: 

AK4404

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  SAFETY

 

‰

WARNING!

 Ensure Health & Safety, local authority and general workshop practice regulations are adhered to when using this 

equipment.

 

9

Familiarise yourself with the application and the limitations of the grease gun, as well as the potential hazards.

 

9

Keep the work area clean, uncluttered and ensure there is adequate lighting.

 

9

Keep the grease gun clean for best and safest performance.

 

9

Check moving parts alignment on a regular basis.

 

8

DO NOT

 use the grease gun for any purpose other than that it was designed for.

 

8

DO NOT

 operate the grease gun if any parts are damaged or missing, as this may cause failure and/or personal injury.

 

9

When not in use store in a safe, dry, childproof location.

 

‰

WARNING!

 Always wear approved eye protection when operating the grease gun.

2.  INTRODUCTION

 

Highly durable die-cast aluminium alloy pump head with air-bleed valve. Fitted with an innovative quick release mechanism to speed  

 

up the re-fill process. Features three-way fill with cartridge, bulk and manual capability. Supplied with a rigid delivery tube, push-on  

 

hydraulic 4-jaw coupling and contoured rubber pump handle. Accepts standard 400g cartridges.

3.  SPECIFICATION

Model No: ................................................................AK4404

Capacity: .................................................................... 400cm

3

Delivery per stroke: ................................................... 0.71cm

3

Delivery pressure: ......................................................7000psi

Optional accessories:

GGHE300 - Rubber Delivery Hose with 4-Jaw Connector Flexible 300mm 1/8” BSP Gas

4.  OPERATION

AK4404       Issue 1     21/04/20

Original Language Version

© Jack Sealey Limited

Refer to 

instructions

 Wear eye 

protection

 Wear protective 

gloves

Air vent valve B

Filler plug

Air vent valve A

 fig.2

Air vent valve A

Quick release 

assembly

Plunger Handle

 fig.1

Reviews: