MODULAR CORNER FLOOR AND WALL CABINETS
865MM
MODEL NO’S:
APMS60, APMS61
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this
storage system.
9
Locate in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
WARNING!
Use storage on level and solid ground, preferably concrete.
9
Keep the storage system clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
8
DO NOT
use the storage system for any purpose other than that for which it is designed.
8
DO NOT
use the storage system outdoors.
8
DO NOT
place the storage system in a damp or wet location or an area where there is condensation.
8
DO NOT
clean the storage system with any solvents which may damage the surfaces or the protective coating.
8
DO NOT
move the storage system when there are items placed inside.
8
DO NOT
step on the shelves.
8
DO NOT
overload the storage system.
2. INTRODUCTION
Modular storage system ideal for any garage/workshop. Durable construction that will last for years. Easily adjusts to specific needs. Purchase a
simple base cabinet or create a full workshop storage system.
APMS60:
Don’t forget to order your choice of pressed wood or stainless steel worktop separately. Use as part of a complete garage storage system
or as an individual storage unit. Aluminium handle. Choice of stainless steel or pressed wood worktop. Features one adjustable shelf. Supplied flat
packed for ease of transportation and requires some self-assembly. High quality lock with two keys.
APMS61:
For use with Model No. APMS60 corner floor cabinet. Supplied with the appropriate fixings to make integral self supporting unit, or use in
conjunction with Model No’s APMS60BP (x2), APMS50UCS (x2) and APMS50UCD (x2) to link to APMS60 and create a full corner system. Lift-up
door is supported by gas struts. Aluminium handles.
3. SPECIFICATION
APMS60 Overall size ..............................865 x 865 x 910mm
APMS61 Overall size ..............................865 x 865 x 350mm
4. CONTENTS: APMS60
Original Language Version
© Jack Sealey Limited
Refer to
instruction
Manual
Wear
Protective
gloves
APMS60
APMS60, APMS61| issue:2 (6,F) 17/12/19
