Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL
REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR
THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE OR PERSONAL
INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
3
Employ all workshop safety rules, regulations, and conditions when using wrench.
p
WARNING!
Disconnect from air supply before changing accessories or servicing.
3
Maintain the
wrench in good condition and replace any damaged or worn parts.
Use
genuine parts only. Non-authorised parts may be dangerous and will invalidate the warranty.
p
WARNING!
Check correct air pressure is maintained and not exceeded. Recommended 70-90psi
3
Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each
use and ensure that all connections are secure.
3
Only use impact sockets which are specifically designed for use with a ratchet/impact wrench.
3
Maintain correct balance and foot ing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and unauthorised persons away from the working area.
7
DO NOT
use the ratchet for a task it is not designed to perform.
p
WARNING! DO NOT
use wrench if damaged or thought to be faulty. (Contact Service Agent).
7
DO NOT
use wrench unless you have been instructed in its use by a qualified person.
7
DO NOT
drop, throw or abuse the wrench as it is a precision tool.
7
DO NOT
carry the wrench by the hose, or yank the hose from the air supply.
7
DO NOT
operate wrench if you are tired, under the influence of alcohol, drugs or intoxicating medication.
7
DO NOT
carry wrench with your hand on the power lever in order to avoid unintentional starting.
7
DO NOT
direct air from the air hose at yourself or others.
3
When not in use, disconnect from air supply and store in a safe, dry, childproof location.
INSTRUCTIONS FOR:
AIR RATCHET WRENCH
MODEL No’s:
SA20/S, SA21/S
2.
INTRODUCTION & SPECIFICATIONS
MODEL No: . . . . . . . . . . . . . SA20/S. . . . . . . . . . . . . SA21/S
Drive size:. . . . . . . . . . . . . . . .3/8”Sq. . . . . . . . . . . . . . 1/2”Sq
Max torque: . . . . . . . . . . . . . . 50ft/lb. . . . . . . . . . . . . . .60ft/lb
Air consumption:. . . . . . . . . . . . 4cfm. . . . . . . . . . . . . . . 4cfm
Operating pressure: . . . . . . . . .90psi. . . . . . . . . . . . . . . 90psi
Air inlet size:. . . . . . . . . . . . 1/4” BSP. . . . . . . . . . . . 1/4” BSP
Weight: . . . . . . . . . . . . . . . . . . .1.2kg. . . . . . . . . . . . . . . 1.2kg
Noise Power: . . . . . . . . 108.47dB(A). . . . . . . . . 108.47dB(A)
Noise Pressure: . . . . . . . 97.47dB(A). . . . . . . . . . 97.47dB(A)
Vibration Emission:. . . . . . . 6.56m/s². . . . . . . . . . . . 6.56m/s²
The air powered ratchet wrench has a hardened steel anvil and twist-to-reverse mechanism.
With trigger operated power control the wrench is suitable for use in the engine bay where there
is limited space for hand operated rachets.
Original Language Version
SA20/S, SA21/S Issue:4(SP)-17/07/13
© Jack Sealey Limited
