background image

spot sprayer 

model no: 

ss37

thank you for purchasing a sealey product. Manufactured to a high standard, this product will, if used according to these 

instructions, and properly maintained, give you years of trouble free performance.

IMPORTANT:

 PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE 

THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR 
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

1.  safety  

1.1.    

GeNeraL safety

 

9

   only use the sprayer for its intended purpose.

 

9

   Familiarise yourself with the applications, limitations, and potential hazards of this product.

 

9

   Use original Sealey spare parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 

9

   ensure containers cannot easily be knocked over during filling.

 

9

   Always ensure good contact on the 12V battery. 

 

9

   mark fluid containers with hazard labels to show their contents.

 

9

   Keep any fluid containers in a well ventilated, lockable store, preferably outside the working area.

 

9

   Keep children and unauthorised persons away from the working area, especially when the sprayer is in operation.  

 

9

   Keep the work area childproof by using padlocks and master switches.

 

9

   maintain the sprayer in top condition. Keep it clean for best and safest performance. 

 

9

   Follow the same precautions when transferring fluid from the sprayer back into other containers.

 

9

   ensure the sprayer is securely fixed to the ATV.

 

9

   Always inspect and prepare the sprayer before use according to the directions provided in this manual.

 

9

   Keep the sprayer turned off. 

Do Not

 turn on power to the sprayer until ready to spray in order to avoid unintentional spray release.

 

8

  

Do Not

 spray when wind speed exceeds 4mph in order to minimize spray drift.

 

8

  

Do Not

 over apply pesticide. Apply at a rate recommended by agents manufacturer. excess pesticide can be dangerous to humans,  

  damage desirable plants, and contaminate soil and water sources.

 

8

  

Do Not

 point the spray gun at people or animals.

 

8

  

Do Not

 eat, drink, rub your eyes, or touch any part of your bare skin while handling agents and spraying.

 

8

  

Do Not 

spray near open flames or sources of heat.

 

9

   Always clean up spills immediately per instructions on the agent’s label.

 

9

   Turn off vehicle and set brake or block wheels, turn off power to sprayer and relieve system pressure before leaving sprayer  

 

 unattended.

 

8

  

Do Not

 use an open flame or smoke anywhere near the sprayer or around stored fluid.

 

8

  

Do Not

 spray fluid into dedicated workshop oil spray equipment.

 

8

  

Do Not

 use any electrical equipment on or near the vehicle while fluid spraying is in progress. This includes the use of inspection    

  lights, mobile phones or pagers.

 

8

  

Do Not

 use the sprayer if the pump is damaged in any way.

 

8

  

Do Not

 use whilst under the influence of drugs, alcohol or other intoxicating medication, or if you are fatigued.

1.2.    

eLectricaL coNNectioN safety

 

9

   If the battery terminals are corroded or dirty, clean them before using the Sprayer.

 

9

   disconnect  the power after every use to avoid accidental starting.

 

8

  

Do Not 

disassemble the remote switch for any reason. The sprayer must only be checked by qualified service personnel.

 

‰

  

WarNiNG!

 To prevent the risk of sparking, short circuit and possible explosion 

Do Not

 drop metal tools in the battery    

 

  area, or allow them to touch the battery terminals.

 

8

  

Do Not

 cross-connect remote switch clamps. 

 

9

   ensure positive (Red) clamp is to positive terminal and negative (blAcK) clamp is to negative terminal.

1.3.    

cHeMicaL safety

 

9

   ensure you read the safety data sheet of the substance you are going to spray.

 

9

  

The sprayer is intended for use in spraying agricultural pesticides and other non-flammable liquids.

 

9

  Spraying pesticides - Pesticides are hazardous agents that must be handled with caution as directed throughout this manual and on the  

  pesticide label. The sprayer is intended for use in spraying pesticides in liquid form only. The sprayer is 

Not

 intended for use in  

 

  spraying pesticides in dry or aerosolized form, or for use with fumigants.

 

9

  Spraying Other Liquids - In addition to spraying pesticides, this sprayer may be used to spray other non-flammable liquids. Example   

  uses include: watering plants/trees or spraying water for dust control, applying ice control agents, applying water-based, non-flammable  

  sealant or stain to outdoor wood surfaces.

 

9

   We Recommend THAT THe SPRAYeR noT be USed FoR oTHeR PURPoSeS once IT HAS AlReAdY been USed FoR  

  SPRAYInG PeSTIcIdeS. Any agents will leave some residual in the tank liner or sprayer components, even after the sprayer has  

  been properly cleaned. These residual agents can have unexpected effects on future uses. For example, spraying water or  

 

  other liquids that are contaminated with residual pesticide may result in unforeseen hazards to plant or animal life.

SS37 | Issue 4 (HF) 03/04/18

Original Language Version

© Jack Sealey limited

      Refer to

   instructions

 Wear eye

protection

 Wear protective

gloves

 Wear protective

clothing

 Wear a mask

Summary of Contents for SS37

Page 1: ...ressure before leaving sprayer unattended 8 8 DO NOT use an open flame or smoke anywhere near the sprayer or around stored fluid 8 8 DO NOT spray fluid into dedicated workshop oil spray equipment 8 8 DO NOT use any electrical equipment on or near the vehicle while fluid spraying is in progress This includes the use of inspection lights mobile phones or pagers 8 8 DO NOT use the sprayer if the pump...

Page 2: ...be used as broadcast sprayer using Model No SSA2 not supplied 3 specification Model No SS37 Tank Capacity 37ltr Maximum Flow Rate 3 8ltr min Maximum Pressure 40psi Maximum Spray Reach 4 3mtr Hose Length 4 5mtr Dimensions W x D x H 711 x 305 279mm Weight 4 1kg 4 contents 5 assembly 5 1 Fasten the two lance clips to the sprayer tank with the two screws supplied See fig 3 5 2 Press the rubber washer ...

Page 3: ...paration 6 1 1 Ensure the sprayer is securely attached to the vehicle 6 1 2 Ensure the sprayer has been thoroughly flushed and drained of all residual agents from prior uses 6 1 3 Clean the suction strainer of any agents residue It is important to clean the suction strainer before each use to ensure it is not clogged and to prevent residual agents from contaminating sprayer contents 6 2 Environmen...

Page 4: ...er Ensure all personal protective equipment is used 8 1 4 When the tank is fully drained replace drain cap and tighten 8 2 Unused Chemicals 8 2 1 If unused agents are to be kept for future use store in the original container or a similarly suitable one Also ensure such container is suitably labelled 8 2 2 When remaining agents need to be disposed of refer to the manufactures label and local author...

Reviews: