topchest 8 drawer 1040mm, rollcab
11 drawer 1055mm heavy-duty
blacK
mODEL NO’s:
ptb104008, ptb105511
thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. saFety
warNING!
Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using these units.
9
Locate the units in a suitable work area.
9
Keep the work area clean, uncluttered and ensure there is adequate lighting.
warNING!
Use the units on level and solid ground, preferably concrete.
9
Keep the units clean and tidy in accordance with good workshop practice.
9
Keep children and unauthorised persons away from the work area.
8
do Not
use these units for any purpose other than that for which they are designed.
8
do Not
use the units outdoors.
8
do Not
place the units in a damp or wet location or an area where there is condensation.
8
do Not
clean the units with any solvents which may damage the surfaces or the protective coating.
8
8
88
do Not
move the units with the drawers out. To avoid tipping, open one drawer at a time and close and secure all drawers whilst
moving.
8
8
88
do Not
step on the drawers.
2. INtroductIoN
H
eavy-duty welded steel construction for strength and durability. Choice of finish, textured powder coat or anti fingerprint stainless steel, both
solvent and rust resistant. Ball bearing drawer slides provide superior performance and carry heavier loads, double sets on large drawers. All
drawers have full width sand blasted aluminium ‘Lift & Latch’ drawer pulls, making easy access while preventing inadvertent opening when box
is being moved. Heavy-duty Ø125mm Mag style castors, two swivel with toe brakes and two fixed on rollcabs. Heavy-duty exterior handles on
chest and rollcabs. Non-slip drawer liners supplied for all drawers. Topchests feature gas struts on lids for easy opening. Rollcabs (except for
stainless steel versions) supplied with 12mm PVC coated mDF worktop for use as a workbench when not used with a topchest. Integral locking
system locks all drawers in each unit with the turn of a key. All supplied with two keys. manufactured to the highest levels to withstand the
toughest of workshop/garage conditions.
3. specIFIcatIoN
model No: ........................................................... ptb104008
O
verall size (W x D x H) mm:
......................
1040 x 450 x 570
m
edium drawer (x3):
.......................................
595 x 385 x 60
m
edium 1/2 drawer (x3):
.................................
300 x 385 x 60
L
arge drawer (x1):
.........................................
595 x 385 x 135
L
arge 1/2 drawer (x1):
...................................
300 x 385 x 135
4. assembly
warNING!
These units are heavy, obtain the help of at least one other person before attempting to unpack them.
4.1.
INstall haNdle (reFer to FIG.1)
4.1.1.
Position the holes on the side of the rollcab and attach with the bolts provided. Tighten securely.
Refer to
instruction
manual
Original Language Version
© Jack Sealey Limited
fig.1
P
TB104008, PTB105511 | Issue:3 (F) 18/03/19
model No: ........................................................... ptb105511
O
verall size (W x D x H) mm:
....................
1055 x 460 x 1050
F
ull width drawer (x1)
....................................
950 x 385 x 135
m
edium drawer (x3)
........................................
595 x 385 x 60
m
edium half drawer (x3)
.................................
295 x 385 x 60
L
arge drawer (x1)
..........................................
595 x 385 x 135
L
arge half drawer (x1)
...................................
295 x 385 x 135
X
Large drawer (x1)
......................................
595 x 385 x 210
X
Large 1/2 drawer (x1)
................................
295 x 385 x 210