Shenzhen Seaory Technology Co., Ltd.
1
www.seaory.com
2
Exellent quality, Perfect service
1. Introduction to Product Components
1.1 Front-end View
1.2 Back-end View
Ethernet interface: RJ45 interface, TCP/IP protocol, the network connection
between the PC and the printer can be realized through this interface
USB interface: USB-B type interface, directly connected to the PC.
Power interface: connect to AC power 100-240VAC, 50/60Hz, 4A.
Power switch: turn on and off the card printer circuit.
Back-end output card slot: The printed card is ejected from here, supslot
manual feeding card on back-end and recycling pending card.
1.3 Front-end View
Input hopper: Blank card storage area, capacity: 200pcs standard
card(0.76mm).
Defective card slot: Defective cards storage area, capacity: 25pcs standard
card(0.76mm).
Quick Use Guide
Desktop Retransfer Dual-sided Card Printer
Model: Seaory R600
Ethernet interface
Power switch
USB interface
Power switch
Back-end output card
slot
Defective card slot
Input hopper
Output hopper
Flattening modular door switch
Input hopper
Ribbon door
LCM Display
Read before use: This manual only briefly describes the
basic installation and use. If you need to know more
about the use, installation and functional characteristics
of this product or have other questions, please refer to
the product manual of the corresponding model.
