CABLE GLAND
INSTRUCTIONS
For Cable Gland Part Numbers
CG20P-G
CG30P-G
CGM17P-G
CG20A-B
CG30A-B
CGM17A-B
CG20-SS
CG30-SS
CGM17-SS
TOOLS NEEDED
2.5mm
Place the plastic base onto
the rubber base gasket.
Be sure to line up the four
screw holes.
Line up the Cable Gland
cover with the four holes in
the plastic base and screw
the bolts in with a 2.5mm
wrench, compressing the
rubber grommet.
Measure your cable diameter and select the appropriate drill tube provided.
Drill pilot holes and secure
the base. Apply marine
adhesive sealant to the
threads of the screws.
Insert the rubber tapered
plug into the base.
1
2
3
5
4
Refer to website for most up to
date instructions and videos.
ww.seaviewglobal.com
Sudbury Elastomeric
Marine Sealant is
recommended. To
purchase call 800-655-7922
or visit
www.seaviewglobal.com
