1
Important:
•
For indoor use only.
•
Battery Low Voltage:
The entrypad will alert low battery when battery voltage is
low. PLEASE REPLACE THE BATTERY IMMEDIATELY.
FEATURES:
1. Manager Code (ID 01):
a) Open lock.
b) Change code.
c) Add/delete user.
d) Disable/Enable user.
e) Manufacturer default is 1-2-3-4-5-6.
2. 8 User Codes (ID 02 to ID 09):
a) Open lock.
b) Change code.
c) No Manufacturer default user codes.
3. Wrong Entry Penalty (Penalty Time)
Entry of four (4) consecutive invalid codes results in a 5-minute penalty time period.
a) The unit beeps at 5 second intervals indicating that it is still in the penalty time
period.
b) While the system is in penalty time, the EntryPad buttons remain unresponsive.
c) While the system is in penalty time, removal of the batteries will interrupt the
penalty time countdown. Upon reinstallation of the batteries, the EntryPad
continues to count down until the 5 minute penalty time period expires.
4. Standby Status
In order to conserve battery power, The system will revert to standby status if there is
Doc.No.: EM1701AC10210303
Version No.: V1.01
SafeLogic C10 D-Drive - Operating Instructions
This manual is for the SafeLogic C10 D-Drive EM-1701A-C10 EntryPad used in conjunction with DL-
1701 D-Drive DeadBolt Lock Body.
In some instances the Manager Code and associated Operating Instructions are not issued
to the End User. In this case, simply remove this insert from the Operating Instruction.
