background image

 

 

 
 
      

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

INSTALLATION INSTRUCTIONS: 

 
The

 

OEM-6400.FT is a special designed OEM camera with a custom mounting style that allows 

it to be mounted easily to the vehicle. It  is designed to take the  place of the  license plate 
illumination lamps on  the 

Ford Transit Van

  2010-2012  vehicles  with minimal installation time 

and with no special tools required for the job. Once installed, the camera looks completely 
factory and is easy to keep out of sight. 

 

 
FEATURES: 

 

  Replaces the license plate illumination lamp when mounted  

  170

°

 ultra wide-angle  

  Easily mounts to vehicle with minimal installation time 

  Parking assist lines to help the driver accurately judge distance behind the vehicle 

  Constructed of high-grade plastic 

  Reverse image 

  The OEM  cam easily connects with other SecurView products such  as any of the LCD 

monitors. It can also be integrated with  your existing OEM or aftermarket LCD/TFT 
displays. 

  The Securview™ OEM-6400.FT is designed specifically for the Ford Transit Van vehicle 

and may not work well on other vehicles. Please check the vehicle before installing to 
make sure the camera can be properly placed 

OEM-6400.FT 

Wide-Angle OEM 

Camera    

 

Summary of Contents for OEM-6400.FT

Page 1: ...plate illumination lamp when mounted 170 ultra wide angle Easily mounts to vehicle with minimal installation time Parking assist lines to help the driver accurately judge distance behind the vehicle Constructed of high grade plastic Reverse image The OEM cam easily connects with other SecurView products such as any of the LCD monitors It can also be integrated with your existing OEM or aftermarket...

Page 2: ...the factory door boot 5 Snap the OEM 6400 FT camera in place on the light fixture Make sure it is secured tightly once it is snapped into place The factory license plate bulb should now be housed inside the OEM 6400 camera Snap the camera and fixture into place on the door STEP 2 NOTE The interior panels of the rear cargo door will need to be removed in order to route the camera cable into the car...

Page 3: ...he vehicle behind the reverse lights You may also connect power inside the vehicle under the dash or in the trunk The Red power wire goes to Reverse Light 12V and the Black wire to Ground 4 Run the Yellow RCA video cable to the monitor s video input or reverse camera input The pair of Green wires coming out of the wire harness is for the Parking Guidelines feature If you leave the two wires discon...

Page 4: ...heck and verify any and all State or Federal Motor vehicle codes with regards to modifications of vehicle license plates The manufacturer of the Securview assumes no liability or responsibility whatsoever with regards modifications of the license plate www crimestopper com email crimestopper com Phone 800 998 6880 FAX 805 581 9500 2012 Crimestopper Security Products 2 22 2012 SPECIFICATIONS 1 4 In...

Reviews: