background image

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

INSTALLATION INSTRUCTIONS: 

 
The  SV-6818.EM.II  is  an  ultra-small  embedded  style  lip-mount  waterproof  back-up  camera, 
designed  to  be  installed  on  any  vehicle.  The  camera  mounts  like  a  flush-mount  camera  but 
gives  the  appearance  of  a  lip-mount  camera  once  installed.  The  small  size  allows  it  to  fit  in 
almost any location on any vehicle as long as it’s a flat surface and the ultra-wide vehicle  angle 
makes it perfect for vehicles with larger blind spots.  

 
FEATURES: 

 

  The  170

°

  ultra  wide-angle  CMOS  color  camera  provides  rear  images  in  real  time  and 

eliminates the dangerous “blind-spot” directly behind your vehicle when backing up. 

  Installs like a flush-mount camera but gives the lip-mount appearance 

  Normal and reverse image selectable 

  Parking lines to help the driver accurately judge distance behind the vehicle 

  Constructed of high-grade plastic 

  Hole-saw bit provided for installation 

  Easily connects with other SecurView™ products such as any of the LCD monitors. It can 

also be integrated with your existing OEM or aftermarket LCD/TFT displays. 

  Waterproof Design (IP67) 

 

 

 
 

 

Summary of Contents for SV-6818.EM.II

Page 1: ... larger blind spots FEATURES The 170 ultra wide angle CMOS color camera provides rear images in real time and eliminates the dangerous blind spot directly behind your vehicle when backing up Installs like a flush mount camera but gives the lip mount appearance Normal and reverse image selectable Parking lines to help the driver accurately judge distance behind the vehicle Constructed of high grade...

Page 2: ...o seal the hole once you route the wiring through to prevent leaking or moisture damage NOTE Make sure to use the supplied hole saw bit to drill the hole for the insert This will help you to avoid any mistakes in drilling the hole too big or too small Camera Lens Mounting Clip Cable Mounting Surface Double Side Tape Use the Provided Hole Saw Bit to Drill the Hole for the Camera REVERSE MIRROR IMAG...

Page 3: ... of the harness is for reverse imaging Keep the wire connected for normal image or cut the wire in half for reverse image The Blue loop wire is for the Parking line option Cut this wire to remove the parking lines or leave it connected to activate the parking line feature 4 Run the Yellow RCA video cable to the monitor s video input or reverse camera input MONITOR BLUE WIRE Parking Line Option Con...

Page 4: ... intended as a replacement for rear view mirrors side view mirrors or physically checking the surroundings when backing a vehicle Always check surroundings for safety when backing Objects on the monitor are closer than they appear For the best fit modification of the vehicle license may or may not be necessary It is the sole responsibility of the vehicle owner to check and verify any and all State...

Reviews: