background image

1

Contents

Contents

Important safety instructions

............................................................................2

The SK 300 G3 bodypack transmitter

...............................................................3

The frequency bank system ........................................................................ 3
Areas of application ...................................................................................... 4

Delivery includes

....................................................................................................5

Product overview

...................................................................................................6

Overview of the SK 300 bodypack transmitter ....................................... 6
Overview of the displays.............................................................................. 7

Putting the bodypack transmitter into operation

.........................................8

Inserting the batteries/accupack ............................................................... 8
Charging the accupack.................................................................................. 8
Connecting the microphone cable/line cable ........................................... 8
Attaching and positioning the microphones ........................................... 9
Attaching the bodypack transmitter to clothing.................................  10

Using the bodypack transmitter

..................................................................... 11

Switching the bodypack transmitter on/off.........................................  11
Deactivating the lock mode temporarily ...............................................  12
Muting the audio signal 
or deactivating the RF signal ...................................................................  12
Selecting a standard display ....................................................................  13

Using the operating menu

............................................................................... 14

The buttons .................................................................................................  14
Overview of the operating menu ............................................................  14
Working with the operating menu .........................................................  15

Adjusting settings via the operating menu

................................................. 17

The main menu “Menu” ............................................................................  17
The extended menu “Advanced Menu” .................................................  19

Adjustment tips

.................................................................................................. 22

Synchronizing the bodypack transmitter with a receiver..................  22

Cleaning the bodypack transmitter

............................................................... 22

If a problem occurs ...

......................................................................................... 23

Specifications

...................................................................................................... 24

Connector assignment...............................................................................  25
Polar diagrams and frequency response curves
of the microphones ....................................................................................  25

Manufacturer Declarations

............................................................................... 26

For more detailed information on the individual sections
of this instruction manual, visit the SK 300 G3 product
page on our website at www.sennheiser.com.

There you can also view an animated instruction manual.

ew G3 SK 300_529670_0109_SP8_PRT.book  Seite 1  Donnerstag, 5. Februar 2009  10:26 10

Summary of Contents for EM 300 G3




























Reviews: