background image

                       

                                                                                                                                                                                

                                                                                                                                      

    

Thank You for choosing The Sensorcon Carbon Monoxide Inspector! We want to be your go to company for all your 
professional needs! Please feel free to contact us with any comments, questions or concerns and we’ll do our best to 
make sure you’re 100% satisfied.

 

                 

        CONTACT INFORMATION:                                                  

              150 N. Airport Drive Bu

alo, NY 14225                                                

          

O

ce:

 (716) 566-2728   

Fax:

 (716) 276-3047 

                              sales@sensorcon.com

                               www.sensorcon.com

 CUSTOMER SERVICE HOURS OF OPERATION: 

              Monday through Friday: 8am to 4pm

                         

Please Note: East Coast Time Zone    

Front View

Side View

Rear View

PORTABLE CARBON MONOXIDE DETECTOR PRODUCT MANUAL

150 Airport Drive Buffalo, NY 14225      Office: (716) 566-2728      Fax: (716) 276-3047     sales@sensorcon.com     www.sensorcon.com   

WARRANTY: 

The Inspector has a 

one year warranty

 on all of its parts. It is recommended that you calibrate the Inspector every six 

months. If you do not calibrate it then there is a good chance it will not provide an accurate measurement. If a calibration 

is never performed an 

EOL

 (End of Life) icon will display on the LCD after two years of use. A successful calibration 

postpones an 

EOL

 for 

180

 days.

NORMAL OPERATING  CONDITIONS: 

Temperature: -20oC to +50oC (-4 F to +122 F)

Humidity: 20-90% R.H (0-99% intermittent)

PRACTICAL CONSIDERATIONS: 

Short term measurements 

(i.e. <1hr)

 in any humidity 

(0-99% R.H.)

 are fine as long as condensation does not block the 

sensor inlet. A longer term exposure to extreme humidity outside the normal range can cause damage to the sensor. 
Damage occurs much faster at higher temperatures. The LCD display and sensor will not work properly at lower 
temperatures. 

NOTE: Higher temperatures can damage the device.

PLEASE NOTE: 

Do you know if there is Carbon Monoxide in the air? The Carbon Monoxide Inspector is a professional grade tool that will 
answer that question. Carbon Monoxide is a toxic and odorless gas that is produced from most combustion processes. 
This includes furnaces, car exhaust and burning cigarettes. 

Page 1

Reviews: