background image

1

26SL41M, 26SL71M
29SL81M

In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its
original condition and only parts identical to those specified should be used.

S80G526SL41M/

MODELS

»

 ELECTRICAL SPECIFICATIONS ......................................................................................................... 1

»

 IMPORTANT SERVICE SAFETY PRECAUTION ................................................................................ 2

»

 LOCATION OF USER'S CONTROL ..................................................................................................... 4

»

 INSTALLATION AND SERVICE INSTRUCTIONS ............................................................................... 5

»

 CHASSIS LAYOUT ............................................................................................................................. 11

»

 BLOCK DIAGRAM .............................................................................................................................. 12

»

 SCHEMATIC DIAGRAMS ................................................................................................................... 15

»

 PRINTED WIRING BOARD ASSEMBLIES ........................................................................................ 32

»

 REPLACEMENT PARTS LIST ........................................................................................................... 36

»

 PACKING OF THE SET ...................................................................................................................... 47

Page

POWER INPUT ...................................... 110-220 V  AC 50/60 Hz
POWER RATING

26SL41M .......................................................................... 120 W
26SL71M .......................................................................... 125 W
29SL81M .......................................................................... 130 W

PICTURE SIZE

26SL41M, 26SL71M ............................ 2,032 cm

2

 (315 sq inch)

29SL81M .............................................. 2,193 cm

2

 (340 sq inch)

CONVERGENCE ............................................................ Magnetic
SWEEP DEFLECTION .................................................... Magnetic
FOCUS .............................................. Hi-Bi-Potential Electrostatic
INTERMEDIATE FREQUENCIES

Picture IF Carrier Frequency .................................... 45.75 MHz
Sound IF Carrier Frequency ..................................... 41.25 MHz
Color Sub-Carrier Frequency ................................... 42.17 MHz

 (Nominal)

SHARP CORPORATION

CONTENTS

ELECTRICAL SPECIFICATIONS

Specifications are subject to change without
prior notice.

AUDIO POWER

OUTPUT RATING

26SL41M ......................................................... 1.5 W + 1.5 W
26SL71M, 29SL81M .............................................. 5 W + 5 W

(at 5% distortion and Dual CH Operate)

SPEAKER

SIZE .............................................................. 12 

×

 6 cm (2 pcs.)

VOICE COIL IMPEDANCE

26SL41M .................................................... 32 ohm at 400 Hz
26SL71M, 29SL81M .................................... 8 ohm at 400 Hz

ANTENNA INPUT IMPEDANCE

VHF/UHF ................................................... 75 ohm Unbalanced

TUNING RANGES

VHF-Channels ............................................................. 2 thru 13
UHF-Channels ........................................................... 14 thru 69
CATV Channels ......................................................... 1 thru 125

SERVICE MANUAL

26SL41M, 26SL71M
29SL81M

COLOR TELEVISION

Chassis No. SN-91A

POWER

POWER

PUSH OPEN

MTS STEREO

Summary of Contents for 26SL41M











































Reviews: