background image

– 1 –

CD-BK3200V

No. S9155CDK3200V

• In the interests of user-safety the set should be restored to its

original condition and only parts identical to those specified be
used.

SERVICE MANUAL

This document has been published to be used
for after sales service only.
The contents are subject to change without notice.

SHARP CORPORATION

NTSC/PAL

 CONTENTS

Page

SAFETY PRECAUTION FOR SERVICE MANUAL ...........................................................................................................  2
VOLTAGE SELECTION .....................................................................................................................................................  2
AC POWER SUPPLY CORD AND AC PLUG ADAPTOR .................................................................................................  3
SPECIFICATIONS .............................................................................................................................................................  3
NAMES OF PARTS ...........................................................................................................................................................  4
OPERATION MANUAL ......................................................................................................................................................  6
DISASSEMBLY ..................................................................................................................................................................  9
REMOVING AND REINSTALLING THE MAIN PARTS ...................................................................................................  12
ADJUSTMENT .................................................................................................................................................................  13
CD CHANGER MECHANISM MAIN BASE PARTS ASSEMBLING/ADJUSTING PROCEDURE ...................................  16
BLOCK DIAGRAM ...........................................................................................................................................................  25
SCHEMATIC DIAGRAM / WIRING SIDE OF P.W.BOARD .............................................................................................  28
VOLTAGE ........................................................................................................................................................................  50
NOTES ON SCHEMATIC DIAGRAM ..............................................................................................................................  51
TYPES OF TRANSISTOR AND LED ...............................................................................................................................  51
WAVEFORMS OF CD CIRCUIT ......................................................................................................................................  52
TROUBLESHOOTING .....................................................................................................................................................  53
FUNCTION TABLE OF IC ................................................................................................................................................  57
FL DISPLAY .....................................................................................................................................................................  68
REPLACEMENT PARTS LIST/EXPLODED VIEW

VIDEO CD MINI SYSTEM

MODEL 

CD-BK3200V

CD-BK3200V Video CD Mini System consisting of
CD-BK3200V (main unit) and CP-BK3200 (speaker system).

Summary of Contents for CD-BK3200V









































Reviews: