background image

ELECTRONIC
CASH REGISTER

MODEL 

ER-A440

SRV Key : LKGIM7113RCZZ
PRINTER : DP730
(For "U" & "A" version)

SHARP CORPORATION

This document has been published to be used
for after sales service only.

Parts marked with "

" is important for maintaining the safety of the set. Be sure to replace these parts with specified

ones for maintaining the safety and performance of the set.

CHAPTER    1.  GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1

CHAPTER    2.  LIST OF OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2

CHAPTER    3.  REMOVING THE TOP CABINET. . . . . . . . . . . . . . . . . . . . . . .  3

CHAPTER    4.  REMOVING THE PRINTER UNIT . . . . . . . . . . . . . . . . . . . . . .  3

CHAPTER    5.  REMOVING THE MAIN PWB . . . . . . . . . . . . . . . . . . . . . . . . .  4

CHAPTER    6.  REMOTE DRAWER: ER-04DW. . . . . . . . . . . . . . . . . . . . . . . .  4

CHAPTER    7.  EXPANSION RAM CHIP (ER-03RA) . . . . . . . . . . . . . . . . . . . .  5

CHAPTER    8.  JOURNAL NEAR END SENSOR: DUNTK3677BH03 . . . . . . .  5

CHAPTER  9. KEY TOP KIT: ER-11KT7/12KT7/22KT7/11DK7G/51DK7G . .  6

CONTENTS

Summary of Contents for ER-A440










Reviews: