1
SPECIAL WARNING
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.
IMPORTANT: SAVE this installation manual FOR LOCAL ELECTRICAL INSPECTOR’S USE.
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CLEARANCES AND DIMENSIONS
For SAFETY CONSIDERATIONS do not install drawer in any combustible cabinetry, which is not in accord with the stated
clearances and dimensions on pages 2 - 5. See Figures 1 - 7.
Microwave Drawer: SMD2489ES
INSTALLATION MANUAL
UNPACKING YOUR MICROWAVE DRAWER
•
Remove all packing
materials from inside the
Microwave Drawer. DO
NOT REMOVE THE
WAVEGUIDE COVER,
which is located on the
top of the Microwave
Drawer.
•
Remove the feature stick-
er, if there is one. Check
the drawer for any dam-
age, such as misaligned
or bent drawer, damaged
drawer seals and seal-
ing surfaces, broken or
loose Microwave Drawer
guides and dents inside
the cavity or on the front side of the drawer. If there is any damage,
do not operate the Microwave Drawer and contact your dealer or
a SHARP AUTHORIZED SERVICER.
IMPORTANT NOTES TO THE INSTALLER
•
Read all of the Installation Manual before installing the
Microwave Drawer.
•
Remove all packing material before connecting the electrical
supply.
•
Observe all governing codes and ordinances.
•
Be sure to leave these instructions with the consumer.
IMPORTANT NOTES TO THE CONSUMER
Keep this manual with your Operation Manual for future reference.
•
As when using any microwave oven generating heat, there are
certain safety precautions you should follow. These are listed
in the Operation Manual. Read all and follow carefully.
•
Be sure your Microwave Drawer is installed and grounded
properly by a qualified installer or service technician.
• This unit comes equipped with a Wi-Fi connectivity option.
In order to activate the Wi-Fi functionality, the area in which
the unit is installed requires a Wi-Fi signal. Please see the
operation manual for the minimum Wi-Fi specifications.
IMPORTANT SAFETY INSTRUCTIONS
If the information in this manual is not followed
exactly, a fire or electrical shock may result that could cause property
damage, personal injury or death.
To reduce the risk of tipping, the Microwave Drawer
must be secured by a properly installed Anti-Tip block.
•
This Microwave Drawer must be electrically grounded in
accordance with local codes.
•
Make sure the wall coverings and the cabinets around the
Microwave Drawer can withstand the heat generated by the
Microwave Drawer.
NEVER LEAVE CHILDREN ALONE OR UNAT-
TENDED IN THE AREA WHERE A MICROWAVE DRAWER
IS IN USE. NEVER LEAVE THE DRAWER OPEN WHEN THE
MICROWAVE IS UNATTENDED.
STEPPING, LEANING OR SITTING ON THE
DRAWER MAY RESULT IN SERIOUS INJURIES AND CAN
ALSO CAUSE DAMAGE TO THE MICROWAVE DRAWER.
•
Do not use the Microwave Drawer as a storage space. This
creates a potentially hazardous situation.
•
Check that the time-of-day is in the display. If not, touch STOP/
CLEAR for safety reasons and to prevent unintended use.
1
Waveguide
Cover
Sealing
Surface
Oven
Cavity
Sealing
Surface
