InstructIon MAnuAL
SPRAY GUN GRAvitY feed
1.3mm Set-UP
ModeL nuMber
S775G
thank you for purchasing a siegen tools product. Manufactured to a high standard this product will, if used according to these instructions
and properly maintained, give you years of trouble free performance.
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS
PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY
AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY INSTRUCTIONS
Familiarise yourself with the application, limitations and potential hazards peculiar to the spray gun.
WARNING!
disconnect the spray gun from the air supply before changing accessories, servicing or performing any maintenance.
ensure spray gun is well maintained and kept in good condition (use an authorised service agent).
replace or repair damaged parts.
Use recommended parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
Keep the spray gun thoroughly clean for best and safest performance.
ensure that the compressed air system can supply the spray gun air consumption (12 to 15cfm).
Wear approved safety respiratory protection and safety eye goggles.
If spraying isocynate based finisher, wear approved respirator/clean air breathing apparatus and cover exposed skin with latex gloves and an
impervious hooded coverall.
remove ill-fitting clothing. remove ties, watches, rings and other loose jewellery and tie back long hair.
Locate the spray gun in a suitable work area. Keep area clean and tidy and free from unrelated materials and ensure that there is adequate
ventilation and lighting.
Keep children and unauthorised persons away from the work area.
When not in use, ensure that the air supply is turned off.
Avoid unintentional operation of spray gun.
DO NOT
point spray gun at yourself, other persons or animals.
DO NOT
direct air from the air hose at yourself, other persons or animals.
DO NOT
carry the spray gun by the hose, or pull the hose from the air supply.
DO NOT
exceed the maximum air pressure of 70psi.
DO NOT
use the spray gun for any purpose other than that for which it is designed.
DO NOT
allow untrained persons to operate the spray gun.
DO NOT
get the spray gun wet or use in damp or wet locations or in areas where there is condensation.
DO NOT
operate the spray gun if any parts are missing or damaged, as this may cause failure and/or personal injury.
When not in use, disconnect the spray gun from the air supply, clean thoroughly before storing in a safe, dry, childproof location.
2. SPECIFICATION
S775G Spray Gun Gravity Feed 1.3mm Set-Up
standard set-up:. . . . . . . . . . . . . . . . . . . . . . 1.3mm
Available set-ups: . .
S775G.SET1.5
- 1.5mm set-up
. . . . . . . . . . . . . . . .
S775G.SET1.8
- 1.8mm set-up
. . . . . . . . . . . . . . . .
S775G.SET2.0
- 2.0mm set-up
Working pressure range: . . . . . . . . . . . . . . 30-70psi
Air consumption:. . . . . . . . . . . . . . . . . . . . 12-15cfm
Pot capacity:. . . . . . . . . . . . . . . . . . . . . . . . . . 600ml
Original Language Version
s775G Issue: 1 - 21/06/10
Professional gravity fed spray gun, ideal for automotive refinishing.
2-Stage trigger control. Adjustable spray width and fluid flow. Suitable
for use with water based paints. Maintenance tools supplied. Alternative
set-ups available separately.
Features:
1
spray Width Adjuster
2
Fluid needle Adjuster
3
Air Adjuster
4
nozzle
5
nozzle retainer
6
Air Inlet
7
trigger
8
Fluid Pot
