background image

FLASHLIGHT 1 and 1 UL

FLASHLIGHT 2 and 2 UL

FLASHLIGHT 1 

(STANDARD, UL & FL MODELS)

PITCHING INSTRUCTIONS

PACKAGE INCLUDES:

 Tent body with attached Rain Fly, 1 NR Joint Rear Pole, 2 Vertical Poles, Guy Cords, Stakes, 1 Pole/Stake Bag and Tent Stuff Sack.

NOTE:

 If you’re carrying trekking poles and want to 

drop 6oz of weight, leave the vertical poles at home. 

Simply insert the handle end of the pole into the 

awning peak and put the trekking pole tip into the 

grommet.

STEP 2:

 Assemble rear pole and insert in grommets. 

Attach the two H-Clips on the tent to NR Joint on pole.

STEP 1: 

Find an even piece of ground; be sure area 

is clear of debris. Layout your tent as shown. Stake 

the 4 corners (circled).

STEP 3:

 Assemble vertical poles. Insert the rounded 

end of the pole into the sleeve located under the 

awning at the peak of the tent. Insert the bottom of 

the pole into the grommet.

STEP 4:

 Now that the vertical pole is installed, stake 

out the front awning (circled). Repeat steps 3 & 4 on 

the other side of the tent.

STEP 5:

 Stake out the rear vent on tent (circled) and 

your tent should be completely set up.

Congratulations on the purchase of you new Sierra Designs Tent! In order to familiarize yourself with 

your new tent, we recommend you “test pitch” it before embarking on your wilderness adventure.

NR Joint with H-Clip 

must face down.

Reviews: