background image

English

Thank you for purchasing the USB Device Server “DS-510”.
This Setup Guide provides information on how to configure 
and use the DS-510 in your network. 

The following items are required.

* If the DS-510 has been used in another network, 

reset it to factory default first (see below for 
details).

Remove the AC plug from the power 
outlet (1).

Push and hold the push switch (2) 
with a fine tipped object such as a pen 
or pencil while inserting the AC plug 
back into the power outlet (3).  
Continue holding. 

When the LINK LED  starts to blink (4), 
the factory default configuration is 
complete.
Release the push switch. 

* There are USB devices not supported due to 

the driver specification.  Please check the 

latest compatibility information on our 

website.

* For each USB port, only 1 device can run on 

bus power.

Connect the DS-510 to the USB device 
using a USB cable (2).

If the USB device requires external 
power, use the power supply cable (6).

Connect the AC adaptor to the DS-510 (3) 
and the AC plug to the power outlet (4). 

Check that POWER LED and LINK LED 
turn on (5).

* Be sure to use the AC adaptor that came 

with the DS-510.

Connect the DS-510 to the Ethernet 
HUB using a network cable (1).

1

2

3

4

5

Download the utilities and user's manual below and extract them on 
your computer.

Access the URL below from the computer you are using to 
configure the DS-510.

This section explains how to download the necessary utilities and user's manual from our website.

1

2

Utility

User's Manual

Device Server Setup

DS-510 User's Manual

SX Virtual Link 

URL:  https://www.silextechnology.com/

3

Go to the 

Support

 page and select the product model.

Product Model

DS-510

DS-510 

Setup Guide

Step 1. Power on and Configuration

Before You Begin

How to power on the DS-510 is explained:

1

22

3

By default, the DS-510 is configured to automatically obtain an IP 
address from the DHCP server.  If the DHCP server is installed on 
your network, the configuration will not be necessary.   In such a 
case, go on to install the SX Virtual Link (see the back). 

When you want to configure the IP address manually or you are not 
sure if there is the DHCP server on your network, move on to       . 

How to configure the DS-510 is explained:

Extract the Device Server Setup file 
that you have downloaded at 

Downloading the necessary items

.

1

See the contained PDF manual (Device 
Server Configuration) to configure the 
DS-510 using the Device Server Setup 
utility.

22

* Before moving on to       , please temporarily disable 

the firewall function of the computer you use for 
configuration.  Some of the methods to disable the 
firewall are provided in the FAQ on our homepage.
- Standard Windows XP firewall
- Commercial security software's firewall function

Power connector

LINK LED

Network port

POWER LED

Push Switch 

USB port

Push Switch

LINK LED

AC Adaptor

Power Outlet

Factory Default Configuration

Power Outlet

Network Cable

Network

Ethernet HUB

USB Device

USB Cable

LINK LED

(5)

(6)

AC Adaptor

(2)

(3)

(1)

(4)

POWER LED

(4)

2

(1)

(3)

Name of Parts

There are Windows version and Macintosh version for each utility. 
Please download the one appropriate for your operating system.

Package Contents

DS-510

Warranty Booklet

AC adaptor

Setup Guide (this document)

Downloading the necessary items

1-1. Power on

1-2. Configuration

Ethernet HUB

Network cable

USB cable

WA101800XD

Reviews: