background image

S2000A & S3000A HYDRAULIC SPREADERS

2525 Gardner Road 

.

 Broadview, Il. 60155 

(800)323-9114 

.

 www.tksimplex.com

Operating Instructions Manual

For 1.0 & .75 Ton Hydraulic Spreaders

S2000A & S3000A Models 

Reference # 54486

Revison B

01/2008

Table of Contents

1.0 Receiving Instructions

2.0 Safety

3.0 Specifications

4.0 Initial Installation 

5.0 Operation

6.0 Maintenance

7.0 Troubleshooting 

S3000A (.75 Ton)

S2000A (1.0 Ton)

Summary of Contents for S2000A

Page 1: ...om Operating Instructions Manual For 1 0 75 Ton Hydraulic Spreaders S2000A S3000A Models Reference 54486 Revison B 01 2008 Table of Contents 1 0 Receiving Instructions 2 0 Safety 3 0 Specifications 4 0 Initial Installation 5 0 Operation 6 0 Maintenance 7 0 Troubleshooting S3000A 75 Ton S2000A 1 0 Ton ...

Page 2: ...e to comply with the following cautions and warnings could cause equipment damage property damage or personal injury CAUTION is used to indicate correct operating or maintenance procedures and practices to prevent damage to or destruction of equipment or other property WARNING indicates a potential danger that requires correct procedures or practices to avoid personal injury DANGER is only used wh...

Page 3: ...11 5 29 21 C IN CM 0 38 0 97 1 26 3 20 OIL CAPACITY 0 61 in 3 91 in WEIGHT 5 lbs 25 lbs MAX OPERATING TEMPERATURE 170 0 F 4 0 INITIAL INSTALLATION BEFORE OPERATING PUMP 4 1 Working Pressure The Tool s maximum working pressure is 10 000 PSI 700kg cm 2 Make sure that all hydraulic equipment such as pumps hoses etc used with this spreader are rated at 10 000 PSI 700kg cm 2 operating pressure refer to...

Page 4: ...owly or advances in spurts Oil level in pump reservoir is low Add oil according to the pump instructions Pump re lease valve open Close pump release valve Loose hydraulic coupler Check that all couplers are fully tightened Load is too heavy Do not attempt to lift more than rated tonnage Air trappedin system Remove air accordingto the instructions above Cylinder plunger binding Check for damage to ...

Reviews: