DIGITAL WOODEN CLOCK
USER MANUAL
Main Features:
-Time Display Mode: 12 or 24 hour time display
-Calendar Mode: Display month and date
-Alarm Mode: Triple alarm time setting
-Temperature Mode: Range from 0
℃
- 50
℃
(32
℉
- 122
℉
)
-3 Display Modes: dp-1,dp-2 and dp-3
-Power saving mode: Activate LED display by sound or touch
-Power supply: 3xAAA Batteries or USB Cable
3V built-in battery to keep time memory
FULL Screen Display
PM Indicator Alarm Symbol Temperature Symbol
Operating Instructions:
After switching it on, the LED turns on with a beeping sound and the device will enter the time setting mode.
Under time display mode, press the SET button to check below in sequence
Time --> Calendar --> A1(Alarm 1), A2(Alarm 2), A3(Alarm 3) --> Temperature
Time Setting:
1. Under the Time Mode, press and hold the SET button for 2seconds to set the clock.
2. Press the SET button repeatedly to set the time in the following sequence :
12/24hr switchover --> Hour --> Minute -->Exit
3. Press the UP/DOWN buttons to adjust the hour and minute digits. Press and hold the UP/DOWN buttons to
speed up the scanning of the digits.
4. When the 12 hour format is set, the PM indicator on the top left corner will appear in the afternoon.
5. The setting mode will return to time display mode if there is no operation for 15 seconds.
Date Setting:
1. Under the Calendar Mode, press and hold the SET button for 2 seconds to set the date.
2. Press the SET button repeatedly to set the date in the following sequence:
Year -->month-->day-->Exit
3. Press the UP/DOWN buttons to adjust the year, month and date. Press and hold the UP/DOWN buttons to
speed the scanning of the digits.
