SIP Weldmate HG2500P Instructions Manual Download

Page: 1 / 16

Ref: 081215

Please dispose of packaging for the product in a responsible

manner. It is suitable for recycling. Help to protect the

environment, take the packaging to the local amenity tip and

place into the appropriate recycling bin.

Never dispose of electrical equipment or batteries in with your

domestic waste. If your supplier offers a disposal facility please

use it or alternatively use a recognised re-cycling agent. This will

allow the recycling of raw materials and help protect the environ-

ment.

FOR HELP OR ADVICE ON THIS PRODUCT PLEASE CONTACT YOUR DISTRIBUTOR,

OR SIP DIRECTLY ON:

TEL: 01509500400

EMAIL: sales@sip-group.com or technical@sip-group.com

www.sip-group.com

Please read and fully understand the instructions in this manual

before operation. Keep this manual safe for future reference.

05770

Weldmate HG2500P AC/DC

Tig/Arc Inverter Welder

With Pulse

Summary of Contents for Weldmate HG2500P

















Search results

Summary of Contents for Weldmate HG2500P

Reviews:

Related manuals for Weldmate HG2500P

Brands by name

Popular brands

SIP Weldmate HG2500P, Instructions Manual

Search results

Summary of Contents for Weldmate HG2500P

Reviews:

Related manuals for Weldmate HG2500P

Brands by name

Popular brands