background image

1

2

3

4

POWERING UP AND PAIRING 

(WITH AUTO HOVER ON)

TOGGLE INTO MANUAL FLIGHT WHILE IN AUTO-HOVER

•  Hold stunt button and press auto land/auto launch button 

and a tone will sound from the remote. Make sure your 
throttle stick is in the down position.

•  After the tone is heard, move the throttle stick up until 

the drone starts to rise. (If throttle is not matched in 
5 seconds then manual flight will be cancelled.)

TOGGLE INTO AUTO HOVER WHILE IN MANUAL FLIGHT

•  Press either the up or down altitude locking button to 

toggle back into auto hover. (Your drone will hover at the 
current throttle speed.)

TOGGLE INTO MANUAL FLIGHT BEFORE TAKE-OFF

•  Hold stunt button and press auto land/auto launch button 

and a tone will sound from the remote. Make sure your 
throttle stick is in the down position. 

•  Push the throttle stick up to  begin manual flight.

•  When launching the drone, face the same 

direction as the drone. Green blades and green 

LEDs should be in front.

•  If your drone drifts in any direction when you are 

hovering, you will need to make Trim 

adjustments to correct the driving. Trim 

adjustments are sometimes needed when the 

drone is first flown after purchase.  See TRIM 

ADJUSTMENTS section for details. 

•  Practice launching, hovering and landing before 

attempting to learn other moves. 

•  Flying 2 to 3 feet above the ground will reduce 

ground turbulence and make flying easier. 

•  When first attempting to fly in different 

directions, start by tapping the direction stick 

until you have a feel for it. Always move controls 

slowly until you become comfortable operating 

the drone. 

•  Once you’ve mastered flying in directions, 

practice rotational controls. Spinning and 

keeping drone facing the same direction as you 

makes flying easier and more intuitive.

•  Stay 2 to 3 feet away from walls and ceilings 

as drone will be drawn towards them if you fly 

too close. 

•  If propeller blades come in contact with 

another object or you crash, throttle down or 

auto land immediately to prevent possible or 

further damage.

•  If anything prevents drone’s blades from 

spinning or they become jammed, throttle 

down or auto land immediately. Do not attempt 

to fly until obstruction has been removed and 

damage fixed.

•  Should something prevent drone’s blades from 

spinning, drone may auto shutdown. LiPo 

battery will need to be unplugged then 

reconnected to restore flying power.

•  If the drone flies too far away, beyond the 

control range of the remote, the drone will 

auto-land to prevent the drone from flying away 

out of control. 

 FLYING GUIDE

STREAMING DRONE 

WITH

 FPV HEADSET

Press 

Auto Launch

 to launch a few feet off the ground.

Use the directional 

Thumbstick

 to fly in any direction. 

Press the 

Altitude

 button to fly approximately 12” higher or lower.

Press the 

Auto Land

 button to land. 

Connect battery wires on bottom of drone.

Place drone on flat surface.

Turn on remote.

Wait for flashing green light to turn solid.

Online Video 

Instructions & Flying 

Tips available now at 

SKYVIPER.COM

FLIGHT CONTROLS

FLYING BASICS

FLYING TIPS

DIRECTION STICK

•  Push the direction stick forward to fly forward or 

away from you (Green blade in front). Push 
backwards to fly backward. The further you push, 
the faster the drone will fly in that direction.

•  Push the direction stick left to fly left. Push right 

to fly right. The further you push, the faster 
the drone will fly sideways.

ALTITUDE BUTTONS

•  Press the up or down arrow to adjust 

the drone’s altitude. The drone will lift 
or lower approximately 12” each time 
the up or down arrow is pressed.
(Distance may vary.)

•  Hold the up or down buttons for 

continuous lift or descent.

AUTO LAUNCH/LAND BUTTON

•  Press the auto launch 

button to launch a few feet 
from the ground. 
(Exact height may vary.)

•  Press the auto land button 

to land the drone by itself.

1 2 3

LOW

MED

1 2 3

HIGH

1 2 3

FLIGHT SENSITIVITY SWITCH

The Drone’s responsiveness may be adjusted on the controller to match your flying skills. 
There are three options: 1 LOW sensitivity     2 MEDIUM sensitivity     3 HIGH sensitivity
It is best to start in the low sensitivity position until you have mastered flying. Flight sensitivity 
can be adjusted before or during flight.

Forward/

Backward Trim

Power On/
Off Switch

Power Indicator LED

Video and photo
Recording buttons

Rotation Trim

Left/Right Trim

Stunt Button

THROTTLE/
ROTATION STICK

Press up to
fly forward

Press down 
to fly 
backward

Press left
to fly left

Press right 
to fly right

DIRECTION STICK

Press up
to lift

Press down
to descend

Press left 
to rotate 
counter-
clockwise

Press right  
to rotate 
clockwise

v2400FPV

THROTTLE/ROTATION STICK

•  While in manual flight mode push the throttle 

stick forward to make drone lift. 

•  The further you push the throttle stick, the 

faster you lift.

  Up and down controls only apply to manual

 

flight mode. 

(

(

01671

Summary of Contents for V2400FPV

Page 1: ...ttery will need to be unplugged then reconnected to restore flying power If the drone flies too far away beyond the control range of the remote the drone will auto land to prevent the drone from flying away out of control FLYING GUIDE STREAMING DRONE WITH FPV HEADSET Press Auto Launch to launch a few feet off the ground Use the directional Thumbstick to fly in any direction Press the Altitude butt...

Page 2: ...vice recording will be redirected to Micro SD automatically Micro SD slot is located on back of drone card sold separately BARREL ROLL While flying forward or reverse tap the stunt button NOTE Once a stunt has been initiated DO NOT adjust Throttle or press any other controls until the stunt has been completed CAUTION The drone should be flying at least 6 feet in the air with a minimum clearance of...

Page 3: ...rom USB charging cable OPTIONAL BLADE GUARDS Blade guards are great for beginning pilots and can be easily installed if desired The guards add undesired weight and reduce flight performance Blade guards are optional and should not be used with advanced flight sensitivity setting 3 To attach blade guards insert the posts of the blade guards into the holes of the drone Press in the posts to lock int...

Page 4: ...demarks logos and copyrights are the property of their respective owners and there is no relationship express or implied with Skyrocket Toys LLC MADE IN CHINA Remove all packaging attachments before giving the toy to a child Not suitable for children under 3 years due to small parts that could be swallowed Conforms to product safety standards ASTM F963 Keep instructions for future reference Do not...

Reviews: