background image

iSmartEV P01 User Manual

www.newsmartsafe.com

I

Copyright Information

Copyright © 2021 by SHENZHEN SMARTSAFE TECH CO.,LTD. All rights
reserved. No part of this publication may be reproduced, stored in a retrieval
system, or transmitted in any form or by any means, electronic, mechanical,
photocopying, recording or otherwise, without the prior written permission of
SMARTSAFE.
Neither SMARTSAFE nor its affiliates shall be liable to the purchaser of this unit
or third parties for damages, losses, costs, or expenses incurred by purchaser or
third parties as a result of: Accident, misuse, or abuse of this unit, or
unauthorized modifications, repairs, or alterations to this unit, or failure to strictly
comply with SMARTSAFE operating and maintenance instructions. SMARTSAFE
shall not be liable for any damages or problems arising from the use of any
options or any consumable products other than those designated as Original
SMARTSAFE Products or SMARTSAFE Approved Products by SMARTSAFE.
All information, specifications and illustrations in this manual are based on the
latest information available at the time of printing. SMARTSAFE reserves the
right to make changes at any time without prior written or oral notice.

Trademark Information

SMARTSAFE is a registered trademark of SHENZHEN SMARTSAFE TECH
CO.,LTD. in China and other countries. All other SMARTSAFE trademarks,
service marks, domain names, logos, and company names referred to in this
manual are either trademarks, registered trademarks, service marks, domain
names, logos, company names of SMARTSAFE or are otherwise the property of
SMARTSAFE or its affiliates. In countries where any of the SMARTSAFE
trademarks, service marks, domain names, logos and company names are not
registered, SMARTSAFE claims other rights associated with unregistered
trademarks, service marks, domain names, logos, and company names. Other
products or company names referred to in this manual may be trademarks of
their respective owners. You may not use any trademark, service mark, domain
name, logo, or company name of SMARTSAFE or any third party without
permission from the owner of the applicable trademark, service mark, domain
name, logo, or company name. You may contact SMARTSAFE by visiting the
website at www.newsmartsafe.com, or writing to SHENZHEN SMARTSAFE
TECH CO.,LTD., 3310, Building 11, Tianan Cloud Park, Bantian Street,
Longgang District, Shenzhen, Guangdong, China, to request written permission
to use Materials on this manual for purposes or for all other questions relating to
this manual.

Summary of Contents for iSmartEV P01









































Reviews: