background image

Specifications

Model

HRS200-A

m

-46-

m

S

Cooling method

Air-cooled refrigeration

Refrigerant

R410A (HFC) 

Refrigerant charge

kg

1.65

Control method

PID control

Ambient temperature/Altitude

*

1, 7

°

C

Temperature: –5 to 45, Altitude: less than 3000 m

Cir

culating fluid system

Circulating fluid

*

1, 2

Tap water, 15% Ethylene glycol aqueous solution, Deionized water

Set temperature range

*

1

°

C

5 to 35

Cooling capacity

*

3, 7

kW

20.5

Heating capacity

*

4

kW

5.3

Temperature stability

*

5

°

C

±

1

Pump 
capacity

Rated flow (Outlet)

L/min

45 (0.45 MPa)

Maximum flow rate

L/min

130

Maximum pump head

m

50

Minimum operating flow rate

*

6

L/min

25

Tank capacity

L

25

Circulating fluid outlet, circulating fluid return port

Rc1 (Symbol F: G1, Symbol N: NPT1)

Tank drain port

Rc3/4 (Symbol F: G3/4, Symbol N: NPT3/4)

Automatic

fluid fill 

system

(Standard)

Supply side pressure range

MPa

0.2 to 0.5

Supply side fluid temperature

°

C

5 to 35

Automatic fluid fill port

Rc1/2 (Symbol F: G1/2, Symbol N: NPT1/2)

Overflow port

Rc1 (Symbol F: G1, Symbol N: NPT1)

Fluid contact material

Metal

Stainless steel, Copper (Heat exchanger brazing), Brass, Bronze

Resin

PTFE, PU, FKM, EPDM, PVC, NBR, POM, PE, NR

Electrical system

Power supply

3-phase 460 VAC (60 Hz)

Allowable voltage range 

±

10% (No continuous voltage fluctuation)

Applicable earth leakage
breaker (Standard)

Rated current

A

30

Sensitivity of leak current mA

30

Rated operating current

*

5

A

14.2

Rated power consumption

*

5

kW(kVA)

9.1 (11.4)

Noise level (Front 1 m/Height 1 m)

*

5

dB(A)

75

Waterproof specification

IPX4

Accessories

Alarm code list sticker 1 pc. (English),

Operation Manual (for installation/operation) 1 pc. (English),

Y-strainer (40 meshes) 25A, Barrel nipple 25A, 

Anchor bolt fixing brackets 2 pcs. (including 6 M8 bolts)

*

8

Weight (dry state)

kg

214

Thermo-chiller 

Air-cooled 460 V Type

Standard Type

How to Order

Option 1

Nil

None

A

With caster adjuster-foot

K

*

1

With fluid fill port

*

1   This is a manual fluid fill port that is different from the automatic 

fluid fill port. Fluid can be supplied manually into the tank without 
removing the side panel. (Fluid can be supplied manually for 
models without option K if the side panel is removed.)

Power supply

46

3-phase 460 VAC (60 Hz)

Pipe thread type

Nil

Rc

F

G (With Rc-G conversion fitting)

N

NPT (With Rc-NPT conversion fitting)

Cooling method

A

Air-cooled refrigeration

Cooling capacity

200

20.5 kW

HRS 200 A

46

S

*

1   When the ambient temperature or circulating fluid 

temperature is 10

°

C or below, refer to "Operation at 

low ambient temperature or low circulating fluid tem-

perature" (page 14).

*

2   Use fluid in condition below as the circulating fluid.

Tap water: Standard of The Japan Refrigeration And 

Air Conditioning Industry Association (JRA GL-02-

1994)

15% ethylene glycol aqueous solution: Diluted with 

clean water, without any additives such as antisep-

tics. 

Deionized water: Electric conductivity 1 

μ

S/cm or 

higher (Electric resistivity 1 M

·cm or lower)

*

3   

q

 Ambient temperature: 32

°

C, 

w

 Circulating fluid: 

Tap water, 

e

 Circulating fluid temperature: 20

°

C, 

r

 

Circulating fluid flow rate: Rated flow, 

t

 Power sup-

ply: 460 VAC

*

4   

q

 Ambient temperature: 32

°

C, 

w

 Circulating fluid: 

Tap water, 

e

 Circulating fluid flow rate: Rated flow, 

r

 Power supply: 460 VAC

*

5   

q

 Ambient temperature: 32

°

C, 

w

 Circulating fluid: 

Tap water, 

e

 Circulating fluid temperature: 20

°

C, 

r

 

Load: Same as the cooling capacity, 

t

 Circulating 

fluid flow rate: Rated flow, 

y

 Power supply: 460 VAC, 

u

 Piping length: Shortest

*

6   Fluid flow rate to maintain the cooling capacity. If the 

actual flow rate is lower than this, install a bypass 

piping.

*

7   If the product is used at altitude of 1000 m or higher, 

refer to “Operating Environment/Storage Environ-

ment” (page 13) Item 13 “

*

  For altitude of 1000 m or 

higher.” 

*

8   The anchor bolt fixing brackets (including 6 M8 bolts) 

are used for fixing to wooden skids when packaging 

the thermo-chiller. No anchor bolt is included.

Option 2

Nil

None

W

SI unit only

(Pending for UL Standards)

INFORMATION

HRS200

 Series

18-E700

Summary of Contents for HRS200 Series




















Reviews: