Snap-On Level 5 VTC eLock 200 Series, Instruction Manual

1

200/300 Series

 — VTC eLock Instructions

200/300 Series

– VTC eLock Instructions

Thank you for purchasing the VTC eLock. The information 

contained in these instructions is intended to serve as a 

guide so as to allow the eLock to be quickly and easily 

put into service. 300 Series eLock can be configured to 

work in conjunction with existing 802.11g or Ethernet 

networks.

For complete set up and installation instructions for 

networked and stand-alone eLocks, please see the 

“Help” section in LockView NTC/VTC Software v4. 

1.  Dot matrix LCD
2.  Network button (blue LED)
3.  “UP” button
4.  “NEXT/SELECT” button
5.  “BACK/CANCEL” button
6.  “MENU” button
7.   “DOWN” button
8.  + Button
9.  - Button
10.  Low battery indicator 

(yellow LED)

11.  Magstripe reader location 

(if equipped)

12.  HID Prox or HID iCLASS 

reader location (if 

equipped)

13.  “ENTER” button
14.  “CLEAR” button
15.  Alpha-numeric keypad

1

2

3

4

5

6

7

8

9

10

15

14

13

12

11

VTC eLock controller

Network 

VTC

 eLock has three components:

Controller

Motorized gear-driven latch

Control module / battery compartment

Exterior mount

Interior mount

VTC